Emulator ABS
 
 
 Welcome to our auction :)
 
 
 
 The subject of the offer is an ABS Emulator for BMW motorcycles,
a device that replaces the INTEGRATED ABS pressure modulator.
 
 
 
The device is made of anodized aluminum. Its design is the same as the original ABS pump and it can replace the original pressure modulator.
 
 
ABS Emulator 
 
 
    
 
 
(types of original ABS pumps which replaces our ABS Emulator)
 
 
BMW motorcycle models and years in which 3rd generation ABS pumps
were fitted.
 
Series "K"
 
K1200LT     (2000-2008)       K1200GT(K44)(2004-2006)
K1200RS(K41)(2000-2005)       K1200S (K40)(2003-2006)
K1200GT(K41)(2002-2005)       K1200R (K43)(2004-2006)
 
 
 
Series "R"
 
R1200C      (2000-2004)       R1150GS(R21)(2002-2005)
R1200CL(K30)(2001-2004)       R1150R (R28)(1999-2006)
R1200GS(K25)(2002-2006)       R1150RT(R22)(2000-2006)
R1200RT(K26)(2003-2006)       R1150RS(R22)(2000-2004)
R1200ST(K28)(2003-2006)       R1100S      (2000-2005)
 
 
 
The principle of operation: hydraulic steering and braking circuitsare
directly connected; a change of software makes the speedometer/odometer
 and brake light work while all signal lamps are off.
  
 
 
 
 (click on the picture to see a video)
 
 
Braking system regains full effectiveness. (without power option and ABS)
  
 
 
 Caution – if a working and defect - free ABS modulator is purchased,
at any time, you can easily, without any modifications, come back
 to original setup.
 
 
 
The weight of a motorcycle is reduced by 4 kg:)
 
 
 
 
(comparison of the weight of an Emulator and an ABS pump)
 
 
 
Just a quick explanation for skeptics: in motorcycles with ABS, brake
pumps are operated with the use of a lever on the handlebar and at the
foot peg
 
 
     
 
(Hand and foot operated pumps)
 
 
have the same (and in some cases even bigger) working diameter of pistons
as models without ABS thus there is no need to worry that
the effectiveness of brakes might be affected.
 
 
 
Fitting the device is not difficult, and anyone who likes working on
his or her bike should have no problems with it.
 
 
 
All you have to do is remove a broken modulator and replace it with
 the Emulator. You do not have to modify, correct, adjust, cross, etc.
anything. You just hook four brake pipes, one plug, vent the system
at brake calipers, and you have efficient and reliable brakes with
lifetime effectiveness guarantee.
 
 
  
       
 (e.g. ABS Emulator fitted on R1200RT and K1200RS)
 
 
No more flashing lights informing us about „residual braking”
(as BMW calls it). Thanks to our device you will have reliable
 brakes and your motorcycle will pass technical inspection.
(provided all other braking system components are fine and working) 
 
 
 
Before clicking „Buy Now” a customer first sends us his/her electronic
 panel (which needs to be unscrewed and removed from a faulty ABS pump)
 
 
 (This is what the front electronic panel which is to be sent to us looks like)
 
 
After receiving a parcel from a customer we prepare a device for
a customer's motorcycle and then send a complete ABS Emulator to
 an indicated address.
 
 
(Sample ABS Emulator ready to be fitted)
 
 
Please note that first YOU have to send us your electronic control panel (which constitutes an integral part of the device) which we have to 
modify keeping all functions of the original controller.
  
 
 
(electronic panel after modification)
 
 
 If you do not know what to do with the remaining part of your faulty modulator, and it has not been ruined or damaged as a result of earlier attempts to repair it, we might be able to purchase it from you.
In such a case, please send to us your (complete) faulty ABS pump
 (instead of just the electronic panel), and we will reduce the price
 to be paid for the ABS Emulator to circa 280 Euros.
 
Caution: We DO NOT buy scrap.
 
 
 
In the case of damaged electronics, we can make an attempt to repair it, but it can be an additional cost.
 
 
 
In the tab "Customer sends us:" there are two possibilities to purchase 

our ABS EMULATOR:

- customer sends to us „Only a panel with electronics” (price ~320,- Euro)

- a customer sends to us „Complete ABS pump” (price ~280,- Euro) 

 

 
 
WARNING:
 
Due to complicated and time-consuming Customs procedures, complete  
ABS pumps are accepted only from within European Union territory.
 
In case of bidders from outside European Union, please DO NOT
send „Complete ABS pump”, Only „a panel with electronics”
 
 While filling out a Customs Declaration, parcels with electronics shall
 be marked as „present/gift” or „for repair” with value of 10 USD.
(very important - not $0, not $20 and not $100)
 
 
 Ready ABS Emulators are sent back to customers within 2-3 business days.

To send us a panel with electronics or a complete ABS pump,
please use the address below:
 
 
 
 
To avoid misunderstanding, we recommend that you first
send us your parcel before making the purchase.
After receiving it, we will inform you about it and we will
prepare an ABS Emulator for your motorcycle.
In the meantime, you will be able to make purchase on eBay.

Please do not suggest the number of available items on eBay, we have hundreds items in stock, we just need your electronic card :)
 
 
 
 
 If you wish to have reliable and precise brakes, and you accept our terms
and conditions, as well as the price, this is just the offer you have
been looking for.