Spray product parameters
Flow parameters:
At a pressure of 3 kilograms, the flow rate of water is:
0.5mm hole: 2.8 liters/hour
0.8mm hole: 4 liters/hour
1.0mm hole: 5 liters/hour
1.5mm hole: 9 liters/hour
2.0mm hole: 14 liters/hour
2.5mm hole: 17 liters/hour
3.0mm hole: 20 liters/hour
3.5mm hole: 23 liters/hour
4.0mm hole: 26 liters/hour
Spray angle: 15-40 degrees
Material: 304 stainless steel/brass
Aperture: 0.5MM, 0.8MM, 1.0MM, 1.5mM, 2.0MM, 2.5mM, 3.0MM, 3.5MM, 4.0MM optional (for more apertures, please consult customer service)
Installation method:
Styles 1, 2, 3: Bottom inlet 2 minutes (1/4) teeth, side inlet liquid 1 minute (1/8) teeth
Style 4: Bottom inlet M12 * 1.25 teeth, side inlet 1 minute (1/8) teeth
instructions:
The intake air pressure is controlled at around 0.3MPA (3kg) using a pressure regulating valve, and the static liquid entering is placed below the nozzle and not more than 1.5 meters away from the nozzle
Application:
Widely used in vegetable oil, diesel oil, heavy oil, alcohol based fuel and other gas, combustion spray systems, lubrication and humidification of working parts, space humidification, disinfection and other applications
Product Description
The Brass body and stainless steel metering parts permit machining to close tolerances for precision.Oil burner nozzle can be customized.
Oil burner nozzle is an oil mist spray nozzle, which can produce hollow cone, full cone,semi-full cone pattern, spray angle: 30,45,60,80 degrees.Flow rate and spray angle being take into consideration as well as its viscidity and density,the general pressure is 7-10bar, the unit is GPH, different strainer is equipped as different flow rate.
Capacity from 0.30-0.35 usgal/h use 30um melting copper filter
Capacity from 0.30-0.35 usgal/h use 45um melting copper filter
Capacity from 0.30-0.35 usgal/h use 75um melting copper filter
Capacity from 2.0-11.0 usgal/h use 140um Monel metal fiter
Capacity above 12.00 usgal/h do not use filter
Product Introduction
Siphon air atomizing nozzle is a low pressure can spray atomization of the best at low pressure air atomizing nozzle. Widely used in diesel, heavy oil, waste oil, animal and vegetable oils, alcohol-based fuel burner system, and for kerosene, oil atomization.
Product Features
1. The use of compressed air to swirl inside the tubes and mix the atomized droplets impact.
2. Can produce tiny micro particle size mist particles at low pressure and low volume conditions.
3. Can control the air flow and pressure to adjust the spray flow, angle and size granularity.
4. Since the fluid passage has a large, and therefore have a good anti-clogging effect.
5. In the heavy oil, waste oil burner, oil and other application viscosity of the liquid atomization effect is very good.