Introduction
New Fukuda 302 electronic self-levelling red rotary laser level set with receiver and remote control.
Rugged, compact, versatile, economic and affordable for faster and more accurate work on-site.
For horizontal, vertical levelling and alignment, 90° layout with plumb point positioning.
Scanning, laser point mode and permanent plumb beam, quick set-up easy to operate.
Professional rotary laser level for interior and exterior applications with the receiver included to extend the working range.
Special builder's set for general building work on-site including brickwork, interior drywall & suspended ceiling work and levelling applications over a 300m diameter area.
Accuracy ±1.5mm/10m.
Range 20m+ Ø / 300m+ Ø (with receiver included)
Precision high-quality engineering from Fukuda Laser.
Upgrade to a Builder's Set
Save £40.00 by buying the FRE302 Rotary Laser Set together with a 1.5m Tripod and 2.4m Staff..
Now available on ebay.
Actual total price £539.99, now £499.99.
For full details, please copy, paste and download the link below.
Features
Fully automatic, self-levelling horizontal and vertical laser beams.
Permanent plumb beam.
Fast electronic levelling sensors
90° layout operation.
Three rotating speeds.
Four scanning angles.
Automatic drift system with visual alarm when out of level.
Low power indication.
Laser complete with receiver & clamp, remote control, magnetic target, laser enhancement glasses,
rechargeable battery pack & charger, padded hard carry case plus instructions.
Technical Specification
Working range - 20m Ø without receiver (subject to ambient light conditions)
300m Ø with receiver (included)
Accuracy - ±1.5mm/10m horizontal
±1.75mm/10m vertical
Self levelling range - ±5°
Operation - manual & automatic (self-levelling)
Rotation - clockwise & anti-clockwise
Drift system - automatic
Rotation speed - 0, 60, 120, 300, 600rpm
Scanning angles - 0°, 10°, 45°, 90°, 180°
Remote control range - 20m exterior
30m interior
Sensor - electronic levelling system
Laser diodes - 635nm <10mW
Output power - <1mW Class 2
Temperature range -10°C to +50°C
Dust/water protection - IP54
Power supply 1 - 4 x 1.2v NiMH 2000mAh rechargeable batteries (included)
Power supply 2 - 4 x 1.5v AA alkaline batteries (not included)
Operating time - 20hrs approx
Mount sockets - 5/8in base & back
Dimensions - 150 x 128 x 161mm
Weight - 1.5kgs (laser only)
4.0kgs (set)
Fukuda Laser - FRE302R