Hot and cold indicator.
Solid metal construction.
White body and chrome finish pull out spray head.
Convenient pull out spray feature and swivel spout.
Pull out spray shower head (normal and shower option).
Minimum 0.5 bar water pressure, 1.0 bar recommended for best performance.
For this tap to operate efficiently your water system will need to produce at least 0.5 bar of pressure, though we recommend 1.0 bar for best performance.
1x Fitting kit
model 2:
Item specifics:
Features:
Polo Pullout Spray Monobloc Kitchen Basin Sink Mixer Tap Faucet
Body material: 59 Copper gravity casting
Valve Core: Φ35mm ceramic valve core
Series: Faucet (can be rotated)
Bubbler: Limiting bubbler, save water and environmental protection
Handle Material: Zinc alloy
Finish: Polished chrome plating 24H acid salt spray test
Service life: ASME--500, 000 times
Type: Kichen Sink Taps
Tap Type: Single Lever
Sub-Type: Monobloc Mixer
Recommended pressure 1-5 bar
Quarter turn ceramic disc valve
Solid Brass body with Chromed finishing
Chromed operating lever allows water flow by simply pushing the lever up or down and sideways for precise temperature control
Hot and cold indicator
Diffuser fitted in the spout for smooth water flow
Swivel Spout
Pull out spray shower head (normal and shower option)
Two tranches water, TPR spout.
Anti-wrap stainless steel braided the Twill tube, free pull, make the sink is no longer dead
Note:
Each set of faucet must test the water before leaving the factory, so if water inside the faucet is normal phenomenon.
Package Included:
1x Polo Pullout Spray Monobloc Kitchen Sink Mixer Tap Faucet+a pair of Inlet pipe
model 3
Features:
Hot and cold indicator.
Solid metal construction.
Convenient pull out spray feature and swivel spout.
Pull out spray shower head (normal and shower option).
Minimum 0.5 bar water pressure, 1.0 bar recommended for best performance.
Description
PRODUCT SIZE
Height approximately: 143mm
Spout projection approximately: 200mm
Pull out hose length approximately: 1.2m
Braided flexible hoses: 450mm (length)
Sink tap hole diameter required approximately: 35mm
WORKING REQUIREMENTS
For this tap to operate efficiently your water system will need to produce at least 0.5 bar of pressure, though we recommend 1.0 bar for best performance.
This can be achieved if you have one of the following:
Combination boiler systems
Gravity fed systems (only with pump)
Megaflow system
Pumped hot water systems
Un-vented hot water systems
Standard pressurised hot water cylinder type systems
Package Included:
1x Mixer tap
2x Braided flexible hoses
1x Fitting kit
model 4
Features:
Hot and cold indicator
Solid metal construction, durable chrome finish.
Convenient pull out spray feature and swivel spout.
Pull out spray shower head (normal and shower option).
Minimum 0.5 bar water pressure, 1.0 bar recommended for best performance.
Description:
Faucet Material: Brass
Spout material: Zinc alloy
Finished: Chrome Plated
PRODUCT SIZE
Height approximately: 130mm
Spout projection approximately: 200mm
Pull out hose length approximately: 1.2m
Braided flexible hoses: 450mm (length)
WORKING REQUIREMENTS
For this tap to operate efficiently your water system will need to produce at least 0.5 bar of pressure, though we recommend 1.0 bar for best performance.
This can be achieved if you have one of the following:
Combination boiler systems
Gravity fed systems (only with pump)
Megaflow system
Pumped hot water systems
Un-vented hot water systems
Standard pressurised hot water cylinder type systems
Package Included:
1x Mixer tap
2x Braided flexible hoses
1x Fitting kit