9780.Z5 Dealer Clone/Original Interface Modification/Flashing Service
Update YOUR Dealer Clone/Original interface to REV C
To fully work with latest 2017 Diagbox software
Fast turn around from a trusted ebay seller over 1800
feedback
Please ask for the address to send your interface to
Would you trust your interface to someone who will do it a bit cheaper
but has little feedback and had to copy and paste my listing ?
The latest Original Diagbox V4.3.3 firmware will be installed to YOUR interface
NOTE :You are NOT buying an interface or any cables, this is a update service only
and it will work fully with the latest Diagbox software v7.01 - v7.62
The price charged is for the Modification and Flashing of YOUR interface
and Diagbox v7.01 dealer software on DVD
I will supply you with the latest Diagbox V7.01 dealer software
with FREE updates to V7.62
Full dealer profiles are included for product activation with instructions
Service boxes and SEDRE are not included
I only need the 9780.Z5 interface unit, don't send all the cables
It will be tested on a Citroen/Peugeot car and returned to you next working day with the software on DVD
Note :
If your interface already has communication problems with Diagbox V5.02-V5.29 or older stand alone Lexia3 /PP2000 this Modification/Flashing could maybe correct that problem
If the green light on the interface is not lit when plugged into a laptop, it means that you have a hardware failure this Modification/Flashing will not correct that problem
Diagbox v7.01-v7.62 can be used with Windows XP SP 3, Vista ,Windows 7 or Windows 8
This will only work with 32-bit versions of Windows and will not with 64-bit
For the following Cars and Vans :
Citroen : C-ZERO, C1, C2, C3 DS3, C4, DS4, C5, DS5, DS 5LS C6, C8, C-CROSSER, NERO, BERLINGO, JUMPY, AX, SAXO, BX, ZX, XSARA, XANTIA, XM, EVASION, C15
Peugeot : ion, 107, 108, 206, 207,207+,208, 301, 307, 308, RCZ, 407, 408, 508, 607, 807, 1007, 2008, 3008, 4007, 4008, 5008, BIPPER, PARTNER, EXPERT, BOXER, 106, 205, 306, 309, 405, 406, 605, 806
1.Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
2.Read fault codes
Displays all stored and pending fault codes with complete description
Program supports report printing or copy to clipboard.
3.Clear fault codes
This function clears all stored fault codes and other diagnostic information.
4.Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5.Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
6.Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
7.Programming functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit