930nm 100mW 5μm Aperture TO-5 Laser Diode

Description:
This is a 930nm single mode laser diode, which can output 100mW kink free optical power from its 5μm aperture. It was p-down bonded on TO-5 (9mm TO can), which was made in the USA. It came to us with a lot of other electronic/opto-electronic related surplus. We have 143 such lasers in stock. The lasers are brand new not used.

 

 

 

Specifications:

Characteristics

Specification

930nm 100mW TO-5 Laser Diode

CW output power (W)

0.10

Peak wavelength (nm)

930± 5

Spectral width (nm)

≤1.0

Threshold current (A)

≤0.05

Operating current (A)

≤0.20

Slope efficiency (W/A)

≥0.8

Beam divergence θ⊥×θ∥ (deg.)

8/30

Wavelength temperature coefficient (nm/℃)

0.3

Emitting area (μm)

5×1

Lifetime(hour)

>10,000

Package

TO-5 (9mm TO can) with cathode ground photodiode

Data Sheet

Available for each diode

 

By Bidding, you must agree and accept:

  • You are over 18 years old and understand the dangers and risks of laser use, and will use this component responsibly.
  • You will use this component in a legal, safe manner to ensure audience and personnel safety.
  • You have a working knowledge of laser diodes. You understand ESD, and the static sensitivity of this component.
  • Laser beam is harmful for eyes during process. Please avoid any directly see on the aperture. Never shine laser beam on human or animals.
  • You accept these diodes as electronic components for integrating them into a system designed by yourself. You relieve the SELLER, and E-bay from any and all LIABILITY from damage or injury that may arise from use of this laser.

   If you are not serious, please do not place a bid.

 

 

Return policy:

  • We will test the lasers before shipment; buyer should contact us as soon as he find it is defective;
  • Refund request should be made within 14 days buyer receives the product;
  • Replacement request should be made within 30 days buyer receives the product;
  • Since this is a Do-It-Yourself laser diode, we only refund if the product arrive to be defective; so please use it gently and properly when you assemble your device; you also need to send back in original shape to get refund/replacement; we won't refund or replace if the laser was damaged by buyers;

 

 

Some tips for operating laser diode:

  • Please use a power supply with stable output. Transient current spikes should be avoided.
  • Please always connect the pins correctly.
  • Heat sink with good thermal dissipation is required for holding the laser otherwise the laser will be burned.
  • Please use eye protection when you operate the laser.
  • It is better to wear an antistatic wrist band.
  • You should always start with current well below the diodes maximum (about 0.20 amps in this case).