The #367 Flat, Hot Rod, Satin Black, is a Single Stage Acrylic Enamel Paint.
This is a Flat NO GLOSS Paint
MIXED TO OUR CUSTOM FORMULA
NOT MIXED TO ANY OEM PAINT CODE!!!!
FOR PROFESSIONAL USE
TO ACHIEVE THE FLAT FINISH SPRAY ON IN LIGHT COATS / TO ACHIEVE THE SATIN FINISH (WITH A LITTLE GLOSS) SPRAY ON IN WET COATS.
The Paint Kit Includes
1 ~ Gallon Flat Acrylic Enamel Paint (Factory Pack)
1 ~ Quart of Medium Temp Reducer
1 ~ Pint of Acrylic Enamel Hardener
Sticks & Strainers
Mix is 8 Parts paint to 1 Part Hardener to 1 to 2 Parts Reducer.
The amount of Reducer will depend on your spray preference and the type of spray gun used.
Flash Time Between Coats @ 70 Degrees is About 15 Minutes. You Will Need to Spray 4 to 5 Coats of Paint.
This Paint Can Be Cleared with a Urethane Clear Coat. Non-Metallic Paint, Clear after a 15 Minute Flash Time.
Metallic Paint Let Dry 1 to 1 1/2 Hours Before Clearing.
Factory Packs are Mixed in Large Volumes at a Time.
All Paints are Shipped by UPS Ground ONLY in UPS Approved Boxes.
"For Questions Call"
Store ~ 417 632 4894
Store Hours ~ Monday - Friday
8:00am to 12:00pm
1:00pm to 5:00pm CST
USA Made, in Missouri.
Ships to the lower 48 states ONLY!
"I have been using and selling this paint for over 20 years".
Due to health risk, approved safety equipment, and clothing should be used.