JMC 3DM3722 3 phase nema 42 nema52
hybrid stepper motor driver/controller/amplifier 80-260VAC 32bit DSP
·
Dual mode for high and low voltage, suitable for the 50V
to 300V motor.
·
Dual mode for single and double pulse, suitable for pulse
+ direction mode and CW, CCW double pulse mode.
·
Have a big torque communication control mode.
·
Integrated motion control function, no need to use PLC or
motion controller.
·
Through the touch screen, can do the direct control or
parameter Download.
·
It is provided with 16 microstep setting of equal angle
and constant torque, maximum resolution of 60000 step per revolution.
·
The highest reaction frequency up to 500Kpps, is 2.5
times of traditional driver.
·
The step pulse stop more than 100ms, coil current
automatically reduced to half of the setting current.
·
The photoelectric isolation signal input / output
·
The 5V, 12V, 24V signal input are compatible, no need to
add external resistor to limit current.
·
The drive current effective value from 1.2A /phase to
7.0A / phase,
·
The single power input, voltage range: AC80V-240V
Typical applications:
CNC cutting/engraving, lazer, textile
machine, etc.
Introduction:
JMC 3DM3722 is new digital stepper motor driver which adopts latest 32-bit
DSP control technology and built-in microstepping technology. Users can set
microsteps within 25600step/rev, and any current value within rated current
range. 3DM3722 driver greatly improves stability and reduces noise under low
subdivision. Automatic parameter tuning is integrated inside this driver, can
helpdriver automatically adjust to best operation parameters to maximize
performance of different stepper motors.
Electrical Specifications:
Parameters |
Min |
Typical |
Max |
Unit |
Output
Current (Peak) |
1.68 |
- |
8.4 |
Amps |
Supply
voltage |
80 |
220 |
260 |
VAC |
Logic
Input Current |
- |
15 |
- |
mA |
Pulse
input frequency |
- |
- |
200 |
KHz |
Low Level
Time |
2.5 |
- |
- |
µsec |
Environment:
Cooling |
Natural
Cooling or Forced Convection |
|
Environment
|
Space |
Avoid
dust, oil frost and corrosive
gases |
Ambient
Temperature |
0°C-65°C |
|
Humidity |
<80%RH |
|
Vibration |
5.9m/s²
Max |
|
Storage
Temp. |
-10°C -80°C |
|
Weight |
Approx.
1.56 Kg |
Microstep Resolution Setting:
Micresstep setting is set by DIP-2,There
are 16 choice in total and was set by the D1-D4 switch,D5-D6 switch are
function setting. The folling is the form:m
Step/rev |
400 |
500 |
600 |
800 |
1000 |
1200 |
2000 |
3000 |
4000 |
5000 |
6000 |
10000 |
12000 |
20000 |
30000 |
60000 |
D1 |
ON |
ON |
ON |
ON |
ON |
ON |
ON |
ON |
OFF |
OFF |
OFF |
OFF |
OFF |
OFF |
OFF |
OFF |
D2 |
ON |
ON |
ON |
ON |
OFF |
OFF |
OFF |
OFF |
ON |
ON |
ON |
ON |
OFF |
OFF |
OFF |
OFF |
D3 |
ON |
ON |
OFF |
OFF |
ON |
ON |
OFF |
OFF |
ON |
ON |
OFF |
OFF |
ON |
ON |
OFF |
OFF |
D4 |
ON |
OFF |
ON |
OFF |
ON |
OFF |
ON |
OFF |
ON |
OFF |
ON |
OFF |
ON |
OFF |
ON |
OFF |
D5 |
ON, M=dual
pulse control mode,MA=high torque mode,MB=serial mode,MC=control function,MD=match with low voltage motor |
|||||||||||||||
OFF, M=single pulse control mode,MA、MB、MC、MD=common mode |
||||||||||||||||
D6 |
autodetect
switch(OFF=receive outside pulse, ON=The
stepper motor drive rotate at 30RPM) |