Description:
Ceramic Vibration Sensor(Red)
Ceramic Vibration Sensor(Red)
Brand New and high quality.
Working Voltage: 3.3V or 5V
Working Current: <1mA
Operating Temperature Range: -10 ~ + 70
Interface Type: Analog Output
GPIO: S; signal output, +; power supply (VCC), -; ground (GND)
Working Voltage: 3.3V or 5V
Working Current: <1mA
Operating Temperature Range: -10 ~ + 70
Interface Type: Analog Output
GPIO: S; signal output, +; power supply (VCC), -; ground (GND)
Package included:
1PC*Analog Piezoelectricity Ceramic Piezo Vibration Sensor for Arduino
1PC*Analog Piezoelectricity Ceramic Piezo Vibration Sensor for Arduino
Ceramic Vibration Sensor (without pin)
Working Voltage: 3.3V or 5V.
Working Current: <1mA.
Operating Temperature Range: -10 ~ + 70.
Interface Type: Analog Output.
Item Size: 30mm x 23mm.
Item Weight: 5g.
GPIO: S; signal output, +; power supply (VCC), -; ground (GND).
Input: Positive electrode of the piezoelectric ceramic.
Gnd: Negative electrode of the piezoelectric ceramic.
S-port is connected with the controller's analog input pin.
5V and GND are respectively connected the power supply of + 5V and GND.
Input and Gnd are already connected with the piezoelectric ceramics' positive and negative.
Package included:
1PC*Ceramic Piezo For Arduino Vibration Sensor Uno Rev3 Micro-Controller Develope
Ceramic Vibration Sensor(Blue)
1.Model:011
2.Name:Ceramic Piezo Vibration Piece Sensor
3.Working Voltage: 3.3V or 5V
4.Working Current: <1mA
5.Operating Temperature Range: -10 ~ + 70
6.Interface Type: Analog Output
7.Item Size: 30mm x 23mm
8.GPIO: S; signal output, +; power supply (VCC), -; ground (GND)
9.Input: Positive electrode of the piezoelectric ceramic
10.GND: Negative electrode of the piezoelectric ceramic
Package included:
1PC*Ceramic Piezo Vibration Sensor
Ceramic Vibration Sensor Module
• Run accommodate 3.3V and 5V supply voltage.
• Small board edge port has a capital A, indicating it is an analog sensor.
• The back panel has a small vibration signs with vibration sensors.
• Small board with high quality fittings, able to withstand thousands of mating cycles, ensuring contact with a solid, well.
• Immersion Gold process, not only to ensure the performance of the module, but with a golden sheen!
• Voltage: no power supply
• Interface Type: Analog
• Current: less than 1mA
• Weight: 10g
Arduino DEMO Code:
void setup()
Serial.begin(9600); //
void loop()
int val;
val=analogRead(0);
Serial.println(val,DEC);//
delay(100);
Package Included:
1PC*Sensor Interface Board
1PC*piezoelectric ceramics
1PC*Analog sensor line