Createx Additive Set
4 oz bottle of each
1 x 4030 Intercoat Clear
1 x 4008 Restorer
1 x 4011 High-Performance Reducer
1 x 4020 Automotive Reducer
4030 Intercoat Clear
A non-catalyzed, polyurethane, water-based clear for use as an inter-coat and mixing direct to colors for improved performance and coating integrity upon curing.
4008 Airbrush Restorer
Restorer is a biodegradable super cleaner which partially dissolves dried paint. Use as an end of day soak to clean airbrush and spray gun parts.
· Soak parts for 10 minutes up to one hour then clean with brush and water
· Restorer will partially dissolve any dried or cured paint as well as soft plastics, keep away from stencils and other plastics
· Not for use as a cleaner between color changes while painting.
· Rinse parts with water thoroughly after soaking with Restorer
· Restorer is reusable; store in a metal can or ceramic cup for multiple uses.
· Water-based. Tested to meet ASTM D-4236 labelling standards.
5619 Createx Colors Restorer is the same as 4008 Auto Air Colors Restorer
Use to thin colors for improved flow, leveling and spray-ability with an acceleration in drying time. For airbrush usage, 4011 Flash Reducer aids with control and preventing over-spray when using smaller tip sizes at lower PSI settings for cleaner lines for detailed work.
4020 AUTOMOTIVE REDUCER
· Speciality thinner for use when painting in humid or cold conditions. Contains Acetone and Glycol Ethers.
· Colors dry faster, cure to a harder coating compared with reducing with 4012 High Performance Reducer
· Works excellently with Createx Illustratio Colors for automotive airbrush colors. Note reducing with 4020 does make Illustration Colors dry hard without soft-erasing.
· Use only in controlled spray environments with adequate ventilation and a NIOSH / MSHA approved respirator
WARNING! EXTREMELY FLAMMABLE LIQUID AND VAPOR. VAPORS MAY CAUSE FLASH FIRE. VAPOR HARMFUL. IRRITANT. HARMFUL IF SWALLOWED