BRAND NEW

1 PAIR

HUBCENTRIC WHEEL SPACERS

Designed to fit the following vehicles / specification

PCD - 4x100 Audi / Seat / Skoda / Volkswagen fitment and BMW 3 series E30 (not M3)

Centre bore - 57.1

Wheel bolt size - Will accept M12x1.5 bolts

Each spacer is 5mm thick - giving 10mm OVERALL width

Please note that "HUBCENTRIC" means that the centre bore is a direct fitment, it does not imply or suggest that these spacers have a "nose" / "collar"

THESE SPACERS ARE COMPLETELY FLAT !

Ideal for spacing your wheels if you have fitted different wheels / brakes / suspension where you just need that little bit of extra clearance and don't want to run a larger spacer

A lot of the time you may not need longer bolts ....

HOWEVER you need to ensure that on your vehicle when fitting the spacer you can still get AT LEAST 5 or 6 full turns of thread

If you cannot get a minimum of 5-6 turns then you WILL need to buy longer bolts