XYZ Printing da Vinci Filament Cartridge Counter Resetter Reset Tool is brand new.
The package includes:
Specification:
It works with the following xyzware software and printer firmware versions:
XYZware
1.1.34.7 and older
model firmware
da Vinci
1.0 1.1.J
da Vinci Duo
2.0 2.0.J
da Vinci AiO 1.1.4
you can test other daVinci model and firmware.
Features:
· Material: ABS
· Filament length: 240 meters
· Extrude temperature 210 °C
· Bed temperature 90 °C
It is plug and play, no software installation, no extra hard ware .
Operation:
1. Turn off your printer
2. Remove the cartridge from your printer
3. Place the re setter to the cartridge
4. connect the re-setter with a computer using a common USB A to type B mini cable (supplied) for power supply
5. let the re setter have good connection with the cartridge (hold
and the press the re setter)
6. press the switch of the re setter for 10 second ! at first the led on the re setter will stop flash, will flash again after about 10 seconds, your cartridge is set
7. Switch Button off.