*POWER SUPPLY IS NOT INCLUDED*
Bitmain recommends using the APW3++ or APW7 power supply.
AntMiner V9 Specifications:
- Hash Rate: 4.0 TH/s (within 5%)
- Power Consumption: 1027W (within 10% at the wall, with APW3++, 93% efficiency, 25C ambient temp)
- Power Efficiency: 0.253 W/GH (within 7% at the wall, with APW3++, 93% efficiency, 25?C ambient temp)
- Rated Voltage: 11.60 ~13.00V
- ASIC Chip: BM1580
- Dimensions: 301mm(L)*123mm(W)*155mm(H)
- Cooling: 2x 12038 fans
- Operating Temperature: 0C to 40C
- Network Connection: Ethernet (network cable not included)
Please note the following:
- Each AntMiner V9 requires TEN 6-pin PCI-e connectors for 12V DC input (must be very stable power source). There are three hash boards that each require THREE 6-pin PCI-e power connectors and one additional 6-pin PCI-e power connector on the controller. All TEN 6-pin PCI-e power connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability.
- Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
- The power supply unit is not included. Bitmain recommends the APW3++ power supply for the AntMiner V9.