THIS AUCTION IS FOR A COMPLETE BRENNER PIEZO-ONE HYBRID CONVERSION SYSTEM FOR VINTAGE ASHTRAY/BARREL SADDLE TELE BRIDGES, INCLUDING THE FOLLOWING ITEMS LABELED (1), (2), AND (3):

(1) One hi-fi piezo-one™ P1-2R gang saddle by Brenner Guitar Products w/ Rean/Neutrik stereo jack, and wire guide) .  

The P1-2R saddle replaces 3 barrel saddles on most vintage style ashtray bridges found on Fender Telecaster and clone guitars (see compatibility below).  Piezo-one™ design features string supports that are machined for maximum sonic engagement with the piezo elements. This electro-mechanical arrangement produces a much stronger output and frequency response than conventional piezoelectric transducer equipped saddles.  The saddles are compatible with all onboard and outboard preamplifiers designed for piezo transducer use. Saddles are 100% machined and assembled in Milwaukee WI, USA. Included are one wire guide, 1/16” allen wrench, intonation wrench, and one Rean/Neutrik 1/4" stereo jack.  The guide neatly leads the wire through the bridge plate along the outside of the existing bridge pickup - no modification!


Brenner piezo-one™ saddles allow simple, reversible, no-modification installation to several popular electric guitar types.  They feature overall compensation and height adjustment screws for precise location. The saddles are precision machined to provide the lowest action on necks ranging from 10" through 14" fretboard radii.  Piezo-one™ string to string compensation provides extreme tonal accuracy when using commonly incremented "unwound G" string sets.



Unlike standard barrel type saddles, piezo-one™ saddles stay in place and are not affected by playing forces.  The gang saddle configuration offers accurate string to string spacing, and greater tuning stability. Gang structure also minimizes string energy loss through the bridge.   An increased energy transfer to magnetic and piezo pickups results in greater output and spectrum from both!


-Model: Brenner piezo-one™ P1-2R


-Replaces: 3 Barrel Saddles On TELE Ashtray Style (4 mounting hole) Bridges With 2-1/8" String Spacing (see compatibility below)


-Improved Tuning Stability


-No Holes Required Through or Underneath the Bridge Plate


-Compatible With Fishman, Graphtech/Ghost, Schaller, LR Baggs, and Other Preamps


-Right Handed


-Quality Rean/Neutrik 1/4" Stereo Jack Included


-Wire Guide included


-Intonation, and height adjustment wrenches included


-Installation Guide Included


-Use It With Our New Outboard PIEZO-PRO Preamp / Splitter for Hybrid Guitar (see our other listings)


MEASURE YOUR EXISTING BRIDGE PLATE TO INSURE COMPATIBILITY:


Outermost Compensation Screw Center Spacing Between 1-11/16" (42.8mm) - 1-47/64" (44mm)


String Compensation (from back of bridgeplate) Approximately 7/8" - High E String - proper bridge placement.  (stud length provides and additional 1/8" of adjustment).


The pickup output wire is oriented for routing through included wire guide as pictured.  The output wire comes with a 3/32" (2.5mm) phone plug attached for more installation options.  Cut and strip the cable for direct connection to the provided stereo jack, or your favorite onboard preamp.  Easy installation and operation instructions will be included in the package, more details can be found at the BRENNERUSA site.



(2) One PIEZO-PRO-V Hybrid Guitar Preamp / Splitter.  The PIEZO-PRO-V is the perfect preamp for use with Strat or Tele piezo-one™  saddles or other hybrid guitar bridge saddles. Please see our other listings for piezo-one bridge saddles and information!

This preamp has a built in splitter to conveniently split your magnetic pickup, and piezo signals for routing to guitar amp, and acoustic amp or PA system.  The foot dial volume control makes it easy to adjust piezo-acoustic stage volume.  THERE IS NO NEED TO PUT A PIEZO PREAMP IN EACH OF YOUR GUITARS!  The PIEZO-PRO has everything you need in a compact, versatile, and easy to use stage setup:

- Stereo Input Jack - magnetic pickup signal on "tip" - piezo pickup signal on "ring"

- Stereo Input Jack Switch - preamp powers up when a stereo cable is inserted

- Outputs (2) - mono magnetic pickup signal - mono piezo preamp out

- 10 Mega-ohm Preamp Input Impedance Rating

- Switching 9VDC 2.1mm Barrel Jack - disconnects battery when using a power supply (standard "negative center" type)

- Four Band EQ / Volume Section

- Master Foot Dial Volume Control

- Battery Check Button

- Compact - pedal board mountable - 3-3/8" W x 6-1/4" L x 2-3/16" H

- The Same Preamp Used In Our YouTube Video!

RECOMMENDED CONNECTIONS:

STEREO IN - Stereo cord from hybrid guitar (tip = magnetic pickup signal, ring = piezo signal)
MAGNETIC OUT - Magnetic pickup signal to guitar amp
PIEZO OUT - Piezo signal to volume pedal / PA system

(3) One Quality 16AWG 10 foot long 1/4-inch stereo male to male cable (TRS) with gold plated plugs.

Brenner Guitar Products is in no way affiliated with Fender, Fishman, Graphtech/Ghost, Schaller, or LR Baggs.  Strat, Stratocaster, Tele, and Telecaster are trademarks of Fender Musical Instruments Corp.