Remote location battery powered 4G GSM Stand-alone Covert UltraDIAL Gate or Door Alarm will contact up to 3 x key-holders via Telephone & SMS if triggered, supplied with:

  • 1 x Wired External H/D Magnetic Contact.
  • 1 x Remote Control (more can be added).

4G UltraDIAL Gate Alarm

How it Works:

The UltraDIAL 4G Auto-Dialler is powered by 3 x AA Lithium Batteries and is ideal for use in the most remote locations (provided there is a mobile phone signal at the location). 

The Wired Gate or Door contact comes supplied with 300 mm of armoured cable (it could be extended but we would recommend protecting the cable while doing so) and is connected into the input relays on the UltraDIAL.

The Magnetic Contact Switch would normally be fitted onto a Gate or Door Post (in the most suitable location) whilst the Magnet would be fitted onto the Gate or Door (in such a position that they are nearly touching when closed).

If someone opens the Gate whilst the UltraDIAL is Armed, the UltraDIAL will silently contact up to three key-holders by Telephone (with your pre-recorded message) & SMS (either can be turned off if required).

The UltraDIAL is Armed using a Remote Control supplied. 

Remote Control for the 4G UltraDIAL

Uses:

This simple Alarm is ideal for various applications, these include:

  • Remote Gates.
  • Stable Doors.
  • Fuel Tank Hinged Door.
  • Remote Barn & Workshop Doors.
  • The list is endless !!

Communication:

The Alarm communicates via the mobile phone networks (nano sim card required). It will contact up to three key-holders by Telephone (with your own pre-recorded message) & Text Message when activated.

Other Uses:

This UltraDIAL can also be used as an Intruder Alarm using various Wireless Detectors & Sirens which can help share the investment, the options include:

  • Wireless Door Contacts (007-0260).
  • Wireless Vibration Sensors (007-1460).
  • Indoor Battery Siren (007-0230).
  • Outdoor Solar or Battery Siren & Strobe (007-0221). 
  • Standard PIR (007-0200).
  • Standard PIR with Hood (007-1410).

Contacting Key-holders:

The Alarm will contact between 1 & 3 key-holders (depending on how you have chosen to program the alarm) by Telephone & SMS (either can be turned off whilst programming the alarm) when activated.

It will normally take take between 30 - 60 seconds to call the first key-holder when powered by battery, (this can vary depending on the mobile phone networks at the time).  

Recording Message:

You can record a 30 second message into the Alarm, which will be replayed to the key-holders when the Alarm calls them.

4G UltraDIAL

Power Supply:

The Alarm is powered by 3 x Lithium AA Batteries (supplied) which will last around 6 - 12 months in most applications, it can also be powered by a 5v Plug in 5v Transformer or USB Cable where a power supply is available. If the power supply is used, the batteries can be kept in the Alarm as a backup although they will not be charged by the device.

Arming & Disarming:

The Alarm is Armed & Disarmed by using the Remote Control from up to 100 metres away, up to 9 Remote Controls can be used with each Alarm. It is also possible to Arm & Disarm the Alarm using the built in keypad if the remote control is not available.
If the Alarm is powered by the external 5v power source, then it is possible to Arm & Disarm the Alarm via SMS (text message).There is a 30 second Exit Delay built into the Alarm for easy use.

Remote Control for the UltraDIAL

Receiving a Call:

When the Alarm calls the key-holders, there is the choice to:

  • Listen to your pre-recorded message and do nothing (the alarm will contact the other key-holders).
  • Listen to your pre-recorded message and press # on your telephone (this will disarm the UltraDial and prevent it from calling further key-holders).
  • Listen to your pre-recorded message and press * on your telephone (this will prevent it from calling further key-holders, but keep the Alarm fully armed (ready for further activations).


Easy Programming:

It is very easy to program, probably the easiest GSM Alarm to program on the market today by using the small built in keypad, following some very simple instructions.

Keypad on the 4G UltraDIAL

Weatherproof:

The UltraDIAL is fully weatherproof and rated at IP66 (not to be submerged), so can be used in most locations.

Weatherproof 4G UltraDIAL

Low Battery:

The Alarm will send the primary key-holder a SMS (text message) if the batteries are getting low.

Status Report:

A status report can be obtained by sending the device a Text Message.

Mains Power Failure:

When the Alarm is being powered by an external 5v power supply, it will send the primary key-holder a SMS (text message) in the event of a Power Cut together with another when the power comes back on (provided you also have batteries fitted).  

Security Screws:

The lid is fitted with 4 x security screws and a tool is supplied as standard.

SIM Cards:

The Alarm communicates via the mobile phone networks (sim card required), and uses a nano SIM Card, it will contact up to three key-holders by Telephone (with your own pre-recorded message) & Text Message when activated.

No SIM Card supplied, we recommend using one from the Country where the device is going to be used !!

This is a very versatile Security device ideal for locations with limited access to Power, designed by Ultra Secure Direct.

If you need advice, (please contact us for advice).


Kit Includes:


Specification:

UltraDIAL:

Gate Contact:

Ultra Secure Direct are a UK Company, Despatching Goods from the UK (within 1 working Day), the goods include UK VAT, therefore there is No Chance of the Buyer Receiving any unpleasant Import Duty Taxes upon receipt of the Goods.