High Grade UPOFC Amp Head Speaker Lead 2.5mm² 2 Core Cable 

Studio Blue Series Van Damme Cable 2.5 mm 2 Core Cable

Jack to Jack 6.35mm 1/4"

Custom made to order

Looking for a quality amp head to cab speaker lead? This lead may well be what you are looking for. The grade of copper used in this cable is 100% ultra pure oxygen free, which means you won't loose those all important frequencies through the lead at all frequencies. The cable inside the jacket is also a twisted pair so coiling the cable up is not an issue, it is flexible.

The construction of the cable consist of 2 conductors 2.5mm diameter with insulation around them, these are then twisted in a pair this helps in the transmission of the signal due to magnetic fields that will surround the cable during use, it also reduces inductance and interference with equipment that is close to the cable. Many manufactures have the conductors in parallel, which will increase the inductance, this is bad for an amplifier and can cause it to become unstable.

Cable Length

We measure the cable out and then add the connectors. The cable is cut to length. Each connector will have 40mm of cable inside it when made up, please bare this in mind when ordering. We have added many lengths for you to order from to get the perfect length. Remember the leads are made to order so errors are costly.

Van Damme Cable Specification

• Cable Speaker type 2 core 2.5mm²
• Conductor Size AWG: 24AWG
• Voltage Rating: 300V
• No. of Strands x Strand Size: 50 x 0.25mm
• Conductor Area CSA: 2.5mm²
• Jacket Colour: Blue
• Jacket Material: PVC (Polyvinyl Chloride) / Neoprene
• External Diameter: 7.6mm
• Conductor Material: Copper
• Cable Type: Twinaxial
• Core-Earth / Core-Core Voltage Rating: 300/500v
• Operating Temperature Max: 80°C
• Operating Temperature Min: -30°C
• Resistance per Metre: 0.00765 ohms

• Higher purity oxygen free copper for the conductors - Ultra pure oxygen free copper
• Excellent solderability and conductivity of the conductor resulting in faithful and transparent signal reproduction
• Polypropylene (PP) is used for the conductor insulation
• Higher temperature rating than most polyethylene insulation giving excellent resistance to shrink back during soldering
• Fixed installations in areas not requiring low smoke zero halogen materials.
• Recording and post production studio environments
• CE approved

Neutrik Rean Jumbo Jack NYS225L

• Rean is owner by Neutrik a very well respected brand within the professional audio trade.
• Jumbo 6.35mm (1/4") Jack Plug
• A jumbo 6.35mm (1/4") jack plug ideal for use with large speaker cables.
• Crimp type strain relief 
• Nickel plated contacts
• Maximum cable diameter 9mm
• Colour - Nickel
• Diameter, pin - 0.25"
• Gender - Plug Male
• Mounting type - Cable Crimp
• Termination method - Solder
• Poles - 2

We also add heat shrink inside the connectors for added security.