HOT WATER SACRIFICIAL ANODE 1510mm Long

Suit : 30 Lt -250LT .......just cut to size with a hacksaw using the old anode as a guide for length

96% magnesium alloy

Replacing the sacrificial anode every 3-5 years dramatically increases the life of your hot water system

Replacement procedure 

1. Isolate the water at mains and electricity 

2. Remove plastic Cap from the top of the system (it differs from system to system but is very

straight forward

3. Use a 27mm socket (or 1 1/16in) to undo the existing anode

4. Insert the new anode and tighten it up

5. Turn the water back on

Please note: some of the bigger tanks may have two anodes in them