The fabulous OnSolar 2W 12V DC LED Down Light now by request, without a built in switch.

A very smart looking LED down light suitable for many applications working with a 12V DC supply. The lamp can controlled via a regular pull or wall mounted switch. An superb unit for use in an energy conscious environment such as narrow boat, RV, Motorhome and off grid home etc.

A super low energy alternative to replace power hungry 10W and 20W halogen down lighters. Use with regular DC constant voltage LED transformers or pure DC 12V battery power.

With it's low profile depth of just 16.5mm it can be installed just about anywhere, a great lamp to install in ceilings, under kitchen wall units and display cases. When installed into vertical surfaces it will create a gentle wall wash effect. Spring loaded clips are held back whilst inserting through mounting hole, for a simple and easy DIY fit.
Ideal lamps for ultra low energy lighting in Off Grid household, marine and caravanning lighting projects

Warm White and Medium White options available!

**All lamps suitable for 12 volts DC**

The 2W downlighter specifications:

Light dispersion:
Operating Voltage:
120°
12V Nominal (10-14V allowable), 350ma.
Energy efficiency rating:
LED Type:
IP rating:
A
SMD 3528 Epistar
IP44
Colour temperature options:
2700°K Warm White and 4000°K Medium White
Lumens:
Massive 170 lumens for warm white & 190 lumens for medium white
Average Lamp life:
50,000 hours
Operating temperature:
-30°C +50°C
Dimensions:
69.5 wide x 16.5mm
Recess hole cut-out:
55mm ∅ x 18mm depth
Operating Voltage:
12V DC (11 to 16V allowable) Recommended to use a regulated 12v dc supply / LED constant voltage transformer or DC / Dc converter.
3 Year Warranty:
Against premature failure
Approx. equivalent light output:
20W halogen
Dimmable:
YES. Use PWM electronic system. Must be DC rated 12V. Note: see suitable dimmer unit elsewhere on OnSolar co uk
Switch:
No built in switch for this model (see other listing for same product with built in switch).

SAFETY 1ST### Please ensure the correct rating of cabling is used throughout when installing DC lighting circuits. Long cable runs may require high grade, high amperage cables in order to prevent excessive voltage loss, especially when using multiple lamps on the same circuit.
All circuits should be fitted with a suitably rated safety fuse in order to prevent fire in the event of short circuit.
Use of proprietary lamp fittings is recommended wherever possible to protect and prevent the ingress of insects mess and damp where lamps may be exposed in external / exterior light fittings.
Note: 12V 'AC’ transformers or any kind of adaptor/ transformer which does not produce DC power should not be used. If using a DC regulated transformer, please ensure that it has enough power reserve for your application.
For any remote application, we recommend the use of Lead Acid or other quality rechargeable batteries and / or using a solar ‘PV’ panel & regulator to replenish power as necessary.

Ideal for Home, Caravan and Boat living areas for mood and / or display cabinet lighting when working with a 12v dc constant voltage supply.


Check out our other items! See more 12V Low Energy Lamps

This product has been designed to work with low voltage applications 10V to 14V and is not suitable for regular AC use.

PLEASE DO NOT USE 120V or 240V AC with this product