Description:
2.8 inch Screen without Touch
100% brand new and high quality
Type: without touch panel
Size:2.8" SPI Serial
Display area:6.5(W) X 4.5(H)cm/2.55 x 1.77''
Driver element: a-Si TFT active matrix
Pixel arrangement: RGB vertical stripe
Driver IC: ILI9341
Backlight: White LED
Viewing Direction: 6 o’clock
Color Depth: 262K/65K
Resolution (dots): 240RGB*320Dots
5V compatible, use with 3.3V or 5V logic
Need at least 4 IOs from your MCU
With PCB plate (including power supply IC, SD), compatible with 5110 interface
Quantity:1pc
Package Included:
1PC*SPI TFT LCD Serial Port Module
3.2 inch Touch Screen
100% brand new and high quality.
Material: Electrical components
Color: See pictures
This is a 3.2 inch TFT touch screen expansion board using standard Arduino Shield interface and it has good compatibility.
It integrates a 3.2-inch touch screen, I2C temperature sensor, TF card holder, level conversion circuit, and the secondary development is easy.
With GPRS module, you can design your Arduino phone.
With NFC reader module, you can create access control systems with the photos show.
With voltage and current sensor, you can make oscilloscope.
Can use it directly to display characters, graphics and BMP format images. And touch controlling is available;
Compatibility: As the SD card is connected to SPI pins of ICSP interface, compatible with Arduino UNO R3 / Arduino Mega2560 / Arduino Leonardo
Touch screen type: resistive touchscreen.
Touch Pen: length is 9cm;
Resolution: 240X400;
Display size: 3.2 inch;
Operating voltage: 5V;
Logic level: 5V / 3.3V;
On-board 3.3V / 300mA regulator circuit;
Operating current: the maximum is 150mA
Use the A0 ~ A3 pins, D4 ~ D13 pins. And I2C interface, D0 / D1 / D2 / D3 is available, please refer to the product schematics for the details.
Onboard Micro SD slot, support Micro SD / TF Card;
Onboard LM75 temperature sensor: default I2C address is 0X48, scale is -55 ~ 125'C
Very suitable for digital photo frame, oscilloscope, function generator, detection system monitor
Size: 9*5.3cm/3.54"*2.09"
Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included:
1PC*Shield
1PC*Touch pen
2.8 inch Screen without Touch
100% brand new and high quality
Type: without touch panel
Size:2.8" SPI Serial
Display area:6.5(W) X 4.5(H)cm/2.55 x 1.77''
Driver element: a-Si TFT active matrix
Pixel arrangement: RGB vertical stripe
Driver IC: ILI9341
Backlight: White LED
Viewing Direction: 6 o’clock
Color Depth: 262K/65K
Resolution (dots): 240RGB*320Dots
5V compatible, use with 3.3V or 5V logic
Need at least 4 IOs from your MCU
With PCB plate (including power supply IC, SD), compatible with 5110 interface
Quantity:1pc
Package Included:
1PC*SPI TFT LCD Serial Port Module
3.2 inch Touch Screen
100% brand new and high quality.
Material: Electrical components
Color: See pictures
This is a 3.2 inch TFT touch screen expansion board using standard Arduino Shield interface and it has good compatibility.
It integrates a 3.2-inch touch screen, I2C temperature sensor, TF card holder, level conversion circuit, and the secondary development is easy.
With GPRS module, you can design your Arduino phone.
With NFC reader module, you can create access control systems with the photos show.
With voltage and current sensor, you can make oscilloscope.
Can use it directly to display characters, graphics and BMP format images. And touch controlling is available;
Compatibility: As the SD card is connected to SPI pins of ICSP interface, compatible with Arduino UNO R3 / Arduino Mega2560 / Arduino Leonardo
Touch screen type: resistive touchscreen.
Touch Pen: length is 9cm;
Resolution: 240X400;
Display size: 3.2 inch;
Operating voltage: 5V;
Logic level: 5V / 3.3V;
On-board 3.3V / 300mA regulator circuit;
Operating current: the maximum is 150mA
Use the A0 ~ A3 pins, D4 ~ D13 pins. And I2C interface, D0 / D1 / D2 / D3 is available, please refer to the product schematics for the details.
Onboard Micro SD slot, support Micro SD / TF Card;
Onboard LM75 temperature sensor: default I2C address is 0X48, scale is -55 ~ 125'C
Very suitable for digital photo frame, oscilloscope, function generator, detection system monitor
Size: 9*5.3cm/3.54"*2.09"
Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included:
1PC*Shield
1PC*Touch pen
Am 05.01.21 hat der Verkäufer die folgenden Angaben hinzugefügt: