PLEASE NOTE THAT ALL LOCTITE PRODUCTS ARE NEVER FILLED TO THE TOP FOR STABILITY PURPOSES
LOCTITE
222 is a low-strength threadlocker that allows the adjustment of screws
including countersunk head screws and set screws. Good on low-strength
metals which could fracture during disassembly, e.g. aluminium or brass.
The product works on all metals, including passive substrates such as
stainless steel, aluminium and plated surfaces. t is proven to be
tolerant of minor contamination due to industrial oils, e.g. engine
oils, corrosion prevention oils and cutting fluids.
Loctite
263 High Strength Threadlocker is a Versatile, high strength liquid
threadlocker. Reliably locks and seals metal fasteners up to 1 in.
Engineered to cure consistently on a variety of metals, despite minor
surface contaminants. Works on steel, stainless steel and most plated
fasteners. Tolerates thread lubrication, corrosion protection
anti-fluids. Rated for 360°F (180°C). Heat required for removal.
LOCTITE 271 is a high-strength threadlocker for maximum efficacy
in the securing and sealing of bolts, nuts and studs to prevent
loosening due to vibration.
LOCTITE 262
High strength, suitable for most metal surfaces.
Thixotropic viscosity, good chemical resistance.
For locking and sealing of thread below M20.
t is a permanent locking thread locking agent, excellent rust and corrosion resistance in extreme chemical environments.
LOCTITE
243 is a general purpose threadlocker of medium bond strength. This
threadlocker secures and seal bolts, nuts and studs to prevent loosening
due to vibration. The product works on all metals, including passive
substrates such as stainless steel, aluminium and plated surfaces. It is
proven to be tolerant of minor contamination due to industrial oils,
e.g. engine oils, corrosion prevention oils and cutting fluids.
LOCTITE 242 Medium strength, medium viscosity, general purpose threadlocker, Breakaway torque 11.5Nm - expiry 08-02-2022
Technical data:
Maximum thread size: Up to M36
Strength: Medium
Breakaway torque M10 bolts: 11.5Nm
LOCTITE
270 is a high-strength threadlocker for maximum efficacy in the
securing and sealing of bolts, nuts and studs to prevent loosening due
to vibration. The product serves to permanently lock assemblies which
must not come loose. It works on all metals, including passive
substrates such as stainless steel, aluminium and plated surfaces. It is
proven to be tolerant of minor contamination due to industrial oils,
e.g. engine oils, corrosion prevention oils and cutting fluids. Can be
disassembled by heating to 300°C.
LOCTITE 272 high temperature, high strength threadlocker
Technical Data:
Maximum thread size: Up to M80
Strength: High