|
|
||||||
|
|
|
|
Description
Our window regulator offer value without compromising quality. It with premium material and solid construction, ensures high strength and reliability. They direct fit -No missing holes, hardware or mounting brackets. It has been 100% tested for RPM, rotational direction, amperage and torque before shipment.
Highlights include
Your "Right Part" Checklist
Use the compatibility chart to identify your vehicle.
Visually compare the part you are replacing with our pictures.
Match reference numbers from the Item specifics section above.
Find the year,make, model, engine and trim in vehicle application to ensure.
Part Number
Replaces dealer part number:741-526, 68059644AA, 55360031AB, 55360031AG, 55360031AH, 55360031AJ, 55360031AM
Fitting for the following vehicles
2007 Jeep Liberty Front Left Ball Stud Style, Regulator Attaches To Metal Liftplate w/Spring Clip
2006 Jeep Liberty Front Left Ball Stud Style, Regulator Attaches To Metal Liftplate w/Spring Clip
2005 Jeep Liberty Front Left
2004 Jeep Liberty Front Left
2003 Jeep Liberty Front Left
2002 Jeep Liberty Front Left
Package
1x Window regulator with Motor in a box
Install the window regulator as follows:
Tools required for removal and installation of window regulator and motor assembly:
• Silicone spray lubricant
• Trim panel removal tool
• Pick
• Saddle cup assembly, tape, or wedge to hold window in place
• Flat-blade screwdriver or plastic pry tool
• 10mm socket or driver
• Phillips screwdriver
• Grease pencil or marker
Removal Instructions
STEP 1: Using a Phillips head screwdriver, remove the interior door trim panel retaining screw.
STEP 2: Using a pic or small fl at-blade screwdriver, remove the cover exposing an interior door trim panel attaching screw.Once the cover has been removed, use a Phillips head screw driver to remove the interior door trim panel attaching screw.
STEP 3: Using a trim panel removal tool, release the interior door trim panel retainers.
NOTE: The interior door trim panel retainers are about 8 inches apart from each other.
STEP 4: Once the interior door trim panel has been released, disconnect the interior door latch rod from the interior door handle.
STEP 5: Disconnect the power door lock switch assembly.
STEP 6: Remove the interior door trim panel.
STEP 7: Using a Phillips head screw driver, remove the three (3) door speaker attaching screws.
STEP 8: Disconnect the door speaker.
STEP 9: Remove the interior water vapor barrier.
STEP 10: Temporarily connect the power window master switch and lower the window glass to expose the two (2) window glass mounting bolts.
STEP 10a: Remove the two (2) window glass mounting bolts and manually slide the window glass into the up position. Hold the window glass in place with either saddle cup assembly, painter’s tape, or wedge.
STEP 10b: Disconnect the window lift motor connector.
STEP 11: Remove the bottom two (2) regulator attaching bolts.
STEP 12: Remove the upper regulator attaching bolt.
STEP 13: Once the window regulator attaching hardware has been removed, remove the window regulator assembly through the access hole.
Installation Instructions
STEP 1: Place the window regulator through the access hole.
STEP 2: Loosely mount the bottom of the window regulator into position.
STEP 3: Loosely mount the top of the window regulator into position.
STEP 4: Once the window regulator has been put into position, tighten the window regulator attaching bolts.
STEP 4a: Connect the window lift motor connector.
STEP 5: Manually slide the window glass down to attach to the window regulator.
NOTE: It may be necessary to temporarily connect the master power switch assembly to raise or lower the window regulator lift plate.
STEP 6: Install the water vapor barrier.
NOTE: Be sure to slide the interior door latch rod through the water vapor barrier.
STEP 7a: Attach the three (3) door speaker attaching screws.
STEP 8: Attach the interior door latch rod to the interior door handle.
STEP 9: Connect the power door lock switch.
STEP 10: Install the interior door trim panel. NOTE: Be sure to align all of the door trim panel retainers.
STEP 11: Install the interior door trim panel door handle bezel retaining screw.
STEP 12: Install the interior door trim panel door pull retaining screw.
STEP 13: Verify that the interior door trim panel is securely fastened and that the window regulator operates properly.
Warranty:
This product is covered by our 1-year warranty.
If a failure occurs due to a manufacturing defect during the expected use, we will replace the part free of charge
Item Specifics | |
---|---|
Brand | ignitionco |
Manufacturer Part Number | VA10609901p |
Placement on Vehicle | Front Left |
Type | Regulator & Motor Assembly |
Operating Mode | Electric |
Motor Included | Yes |
OE/OEM Part Number | 741-526 |
Custom Bundle | No |
Package Contents | 1 Power Window Regulator |
Packaging Type | Box |
Manufacturer Warranty | 1 Year |
Fit for | 02-07 Liberty Jeep Front Left Driver Side |
Superseded Part Number | Window Regulator Front Driver Side Replacements |
Surface Finish | Smooth |
Product Fit | Direct fit |
Attachment Type | Bolt On |
Performance Part | Yes |
Modified Item | No |
Installation Instructions Included | No |
Gear Material | Plastic |
Frame Material | Metal and Plastic |
Mounting Hardware Included | No |
Fitment Type | Direct Replacement |
Weight | about 11 lbs |
Package Size | 22*19*5 inch |
Fitment(Note) | Verify this part fits your vehicle using the compatibility chart |
Housing Material | Steel |
You have 7 days to contact us and 10 days to return it from the date it was received. If this item is inyour possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
Store Cat. |
For 2002-2007 Jeep Liberty Power Window Regulator w/ Motor Front Driver Side
Description
Highlights include
Your "Right Part" Checklist
Use the compatibility chart to identify your vehicle.
Visually compare the part you are replacing with our pictures.
Match reference numbers from the Item specifics section above.
Find the year,make, model, engine and trim in vehicle application to ensure.
Part Number
Fitting for the following vehicles
2007 Jeep Liberty Front Left Ball Stud Style, Regulator Attaches To Metal Liftplate w/Spring Clip
Package
Install the window regulator as follows:
Tools required for removal and installation of window regulator and motor assembly:
Warranty:
This product is covered by our 1-year warranty. If a failure occurs due to a manufacturing defect during the expected use, we will replace the part free of charge WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!▪ Orders processed within 24-48 hours of payment verification.
▪ We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
▪ The images shown are not the actual item and are for your reference only.
▪ Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!▪ Orders processed within 24-48 hours of payment verification.
▪ We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
▪ The images shown are not the actual item and are for your reference only.
▪ Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
You have 7 days to contact us and 10 days to return it from the date it was received. If this item is inyour possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
Copyright of ignition-coil. All rights reserved. |