MADE IN ENGLAND

Two DiY Ring electrodes suitable for connection to Estim device or Tens.

NOTE: The picture shows the length of rubber, ready wired with the connector and CR sleeve/joincover and an example of of rings that can be formed. 

The rubber tube 6.5mm (1/4") in diameter is highly conductive and is wired with standard 2mm Tens pinwires

The kit is one length of at least 15+" (400mm) CR ready to be cut to size/length by the buyer to suit their requirements.- Simply cut the rubber into two suitable lengths and form rings by pushing the cut end onto the joiner. There is more than enough tube for two rings so if you wish to make a loop out of the off-cut, message me for a FREE clip. 

A note of various tube lengths required for specific diameters will be included.

The joiners' diameters are size specific so you choose from the drop down menu your two required ring sizes - small is less than 38mm large is over 38mm internal diameter. 

When creating simply cut a slightly longer length than required before the final cut. A little saliva can help when making the join. As a guide the approximate tube lengths for internal diameters in millimetres are;

25=98, 28=108, 32=118, 35=128, 38=138, 42=148, 45=158, 48=168, 50=177

If you have 4mm banana plugs  or snap connectors on your device, message me for a free pair of adaptors, they are home-made but service Okay

We love your feedback but if you don't want feedback from us please advise.

PLEASE NOTE WE DON'T USE TRACKING