- ON-LINE BARCODE VERIFIER
ОЕИ
'"."JIl'lllL11!
1
]"!
i
О1м11|Гп1
Avoid costly problems caused by out-of-spec. barcodes.
Real-time, On-line verification.
Verifies all propular barcodes.
• Multiple operating Modes.
• Up to 10 symbols per label.
• Compact and Easy to install.
An out-of-spec. barcode can be costly
to you and your customer.
More and more you need to verify that your barcodes are printed in spec.
to meet the requirements of your customers. Using the SATO VERISCAN I will give you the security that an
out-of-spec. barcode on a label should not reach any of your customers!
The SATO VERISCAN I is very easy to install, just a single cable connects the unit to the printer.
The fully adjustable stand offers a wide range of settings for various label sizes and formats.
The SATO VERISCAN I uses a moving, visible light laser beam to check every label as it is printed. When the
SATO VERISCAN I detects that an out-of-spec. symbol has been printed, it pauses the printer.
The in-built flexibility of the SATO VERISCAN I enables you to set it up to suit your operating requirements. All the
programming is carried out using the four push buttons, together with the 2-line alpha-numeric display. The SATO
VERISCAN I can be set in 2 modes, freescan or syncronous. It can be set to pause the printer on detection of an
out-of-spec. symbol, to store the verification data for analysis and review later, or you can select the factory-default
settings. Once programmed, and initialised, the SATO VERISCAN I operates without further need for operator input.
By using the SATO VERISCAN I you can verify the content and quality of each barcode symbol printed on the label,
in real time, to ensure that you maintain the quality standard required. The SATO VERISCAN I tests for ANSI readability
of grades А, В, С, and D, and will check and reference decode calculations. It can also analyse and record outof-spec.
quiet zone dimensions, bar ratios, wide and narrow bar widths, inter-character gaps(ICG), and modulus
characters, Labels may contain up to a maximum of 10 barcode symbols, formatted to a maximum of 6 lines, with
1 to 4 symbols on each line.
When the symbols within a label format have been pre-defined, or the SATO VERISCAN I is used in the "DATA
MATCH" mode, it operates in the "maximum security mode", and scans at the top speed of 40 scans per second.
When operated like this, there is a minimal effect on the prinTechnical Specifications
Modes
Synchronous
Free Scan
Analysis
ANSI Parameters
ANSI Decodability Grade А, В, С and D.
ANSI Reference Decode Calculation.
Traditional Parameters
Ratio, Encodation Check, Mod Chek, Average Barwidht
Deviation, Quiet Zone, Inter-Character
Gap(ICG), Addendum Parity (EAN/UPC).
Character Validation.
Multiple Barcode Analysis
Up to 4 non-rotated symbols per scan line, 6 scan lines
per label format. Maximum 10 symbols per label.
Symbologies
CODE 39, CODABAR, Interleaved 2 of 5, EAN/UPC including
2 and 5 digit addendum, CODE 128, CODE 93
Scanner System
Moving beam visible light laser diode.
670 nm (red) wavelength; 40 scans per second.
7,5 mil minimum "X" dimension.
50 ms nominal symbol analysis time.
Minimum Barcode Height Versus Print Speed
Maximum Print Speed Barcode Height
9 mm(0,35")
12mm(0,5")
18mm(0,7")
100 mm/sec(47sec)
150mm/sec(6"/sec)
200mm/sec(8"/sec),
in High security mode.
Programmable Response
Single, Consecutive or Cumulative event activation.
Record Keeping
• Good Read
• Warnings: Quiet Zone, Ratio, Wide, Narrow, ICG
• Profile Failures: Ref. Decode, Decodability.
• Rejects: Mod. Check, Format, Wide, Narrow,
No Read.
Data Match
Verify against
"master" label
Auto
Discrimination
Automatically
locates, identifies
and verifies up to
10 barcode
symbols per label
format.
User Interface
Display LCD 2 lines x 16 characters
Switches ENTER
SELECT
F1
F2
Indicator LED's PRINT/PAUSE
REJECT
ANSI DECODE FAIL
WARNING
GOOD READ
SYNC
Interface
Asynchronous Serial
• Printer Control, DB-15 (Cable included)
• Real Time COM port, DB-9
Data Transmission
8 Data bits, 1 Stop bit, no parity.
RTS/CTS or XON/XOFF.
9600 Baud rate
ASCII
Input Power
+ 5vDC, ±5%, 300mA
Power is provide by the printer, via the external socket
on the rear panel.
Dimensions
Width 108 mm (4,25")
Height 190 mm (7,5")
Depth 95mm (3,75")
Weight
1 kg (2,2 Ibs)
Environment
Operating:
+5° to +40°C
(+40° to 100°F)
10 to 90% RH,
non condensing
Storage:
+0 to +60°C
(+0° to +140°F)
10to90%RH,
non condensing
Static Discharge
8kV
Approvals
FCC Class A
Illlllllllllllll
SATO EUROPE GMBH
Im Hulsenfeld 13, 40721 Hilden
Tel.: 021 03/9592-0, Fax: 021 03/55322
SATO Corporation
15-5, 1-Chome. Shibuya-ku, Tokyo, 150Japan
SATO America Inc.
545 Weddell Drive, Sunnyvale, CA 94089ter's through-put.
- Technical Specifications
Modes
Synchronous
Free Scan
Analysis
ANSI Parameters
ANSI Decodability Grade А, В, С and D.
ANSI Reference Decode Calculation.
Traditional Parameters
Ratio, Encodation Check, Mod Chek, Average Barwidht
Deviation, Quiet Zone, Inter-Character
Gap(ICG), Addendum Parity (EAN/UPC).
Character Validation.
Multiple Barcode Analysis
Up to 4 non-rotated symbols per scan line, 6 scan lines
per label format. Maximum 10 symbols per label.
Symbologies
CODE 39, CODABAR, Interleaved 2 of 5, EAN/UPC including
2 and 5 digit addendum, CODE 128, CODE 93
Scanner System
Moving beam visible light laser diode.
670 nm (red) wavelength; 40 scans per second.
7,5 mil minimum "X" dimension.
50 ms nominal symbol analysis time.
Minimum Barcode Height Versus Print Speed
Maximum Print Speed Barcode Height
9 mm(0,35")
12mm(0,5")
18mm(0,7")
100 mm/sec(47sec)
150mm/sec(6"/sec)
200mm/sec(8"/sec),
in High security mode.
Programmable Response
Single, Consecutive or Cumulative event activation.
Record Keeping
• Good Read
• Warnings: Quiet Zone, Ratio, Wide, Narrow, ICG
• Profile Failures: Ref. Decode, Decodability.
• Rejects: Mod. Check, Format, Wide, Narrow,
No Read.
Data Match
Verify against
"master" label
Auto
Discrimination
Automatically
locates, identifies
and verifies up to
10 barcode
symbols per label
format.
User Interface
Display LCD 2 lines x 16 characters
Switches ENTER
SELECT
F1
F2
Indicator LED's PRINT/PAUSE
REJECT
ANSI DECODE FAIL
WARNING
GOOD READ
SYNC
Interface
Asynchronous Serial
• Printer Control, DB-15 (Cable included)
• Real Time COM port, DB-9
Data Transmission
8 Data bits, 1 Stop bit, no parity.
RTS/CTS or XON/XOFF.
9600 Baud rate
ASCII
Input Power
+ 5vDC, ±5%, 300mA
Power is provide by the printer, via the external socket
on the rear panel.
Dimensions
Width 108 mm (4,25")
Height 190 mm (7,5")
Depth 95mm (3,75")
Weight
1 kg (2,2 Ibs)
Environment
Operating:
+5° to +40°C
(+40° to 100°F)
10 to 90% RH,
non condensing
Storage:
+0 to +60°C
(+0° to +140°F)
10to90%RH,
non condensing
Static Discharge
8kV
Approvals
FCC Class A
Illlllllllllllll
SATO EUROPE GMBH
Im Hulsenfeld 13, 40721 Hilden
Tel.: 021 03/9592-0, Fax: 021 03/55322
SATO Corporation
15-5, 1-Chome. Shibuya-ku, Tokyo, 150Japan
SATO America Inc.
545 Weddell Drive, Sunnyvale, CA 94089