HIGH-END BUILT-IN DVR FOR VEHICLE EQUIPMENT VISION SECURITY SYSTEM
7" DIGITAL QUAD / SPLIT SCREEN MONITOR BUILT-IN DVR RECORDING
7“ TFT LCD QUAD / SPLIT SCREEN WIDH DVR RECORDING MONITOR
+ 3 x CCD SIDE VIEW CAMERAS
+ 1 x CCD BACKUP CAMERA
Since the advent of the motor vehicle, drivers have always been in search of a way to see behind the ride, in the area which mirrors alone cannot reach, also called the Blind Zone. Now the backup camera system has become a secure, affordable way of eliminating the blind zone while significantly increasing rear view safety. By providing the user with a real-time, crystal clear view from the back of any vehicle, a rear view back up camera allows you to reverse with confidence!
The backup camera systems that will fit virtually any truck or trailer, emergency vehicle or commercial vehicle, including school buses, house boats, coach buses, motor homes and RV
Rear view cameras make parking, driving and backing up a safer experience for everyone. If you are in the market for this type of product, we highly recommend that you purchase one of the fine products we have researched and reviewed.
Description:
* Built-in DVR Quad / Split Screen Digital Monitor System.
* Quad Monitor Camera System is Able to Show 4 Camera Views at one Time.
* 12~32 VDC Vehicle Power Supply.
* IR LED Night Vision Waterproof Camera.
* 4 pin Connector Color CCD Sensor.
* Normal / Mirror Image adjustable on menu of DVR.
PART 1 : 7 " TFT LCD QUAD / SPLIT SCREEN MONITOR WISH DVR RECORDING
The recording file stored in SD card, maximum 64G. When play the videotape, 15 minutes is a segment(you can set up the time), each camera has a separate video file.The unit can re record on the same card in a loop.
This unit can support one camera with audio, so the driver can hear instructions immediately from the person guiding him at the rear of the RV. Please kinkly note, we will send unit without audio as default, if need audio unit, please contact us.
Appearance and Keystroke function:
We can set the image mode through three Keystroke: #2, #6, #7 and #8. Press the "AV(#2)" button over and over again, monitor will show single video, dual video, triple video, quad video in turn.
Remote Control Instruction:
We must use this remote control to set all DVR function.
DVR main menu:
Wiring Instruction:
AV1/AV2/AV3/AV4 with trigger wire, once trigger wire activated, i mage automatically switchover to corresponding camera, and take picture soon.
The power cable has 7 wires, their definition as follows:
Red and yellow wire: 12-32V
Black wire: GND
Green wire(remark 1): trigger wire, control V1
Purple wire(remark 2): trigger wire, control V2
Gray wire(remark 3): trigger wire, control V3
White wire(remark 4): trigger wire, control V4
Please kindly note: please take the red wire and yellow wire together, and then connect them to the 12~32 volt. This is important.
About the bracket of monitor:
The monitor has U-Braccket and Metal Bracket. Please kindly note: We will send U-Bracket as default, if need Metal Bracket, please send a message to us or write it in the comment when you order.
PART 2 : SIDE VIEW CAMERA
Description:
* DC12V Power Supply (from Monitor). Without additional external power supply.
* Wateproof & Shockproof Color CCD Camera.
* It has 10 LEDs for good clear night vision.
We also provide the white side camera:
Please kindly Note: We will send Mirror Image camera as default, please cut the red wire if need NON-Mirror Image .
Image Type: High Performance Color 1/3 Sharp CCD
Horizontal Resolution: 600TV Lines
PAL:752(H)×582(V)
Usable Illumination : 0Lux ( Built in 9pcs IR LED's for Picture Support in the Dark)
Free viewing angle: 120 degree
Waterproof: IP66
Shockproof: 10G
PART 3: REAR VIEW CAMREA
Description:
* DC12V Power Supply (from Monitor). Without additional external power supply.
* Wateproof &Shockproof Color CCD Camera.
* It has 18 LEDs for good clear night vision.
We also provide the white backup camera:
Please kindly Note: We will send Mirror Image camera as default, please cut the red wire if need NON-Mirror Image .
Waterproof IR Color CCD Camera
Image Type: High Performance Color 1/3 Sharp CCD
Horizontal Resolution: 600TV Lines
PAL:752(H)×582(V)
Usable Illumination : 0Lux ( Built in 18pcs IR LED's for Picture Support in the Dark)
Free viewing angle: 120
Waterproof: IP66
Shockproof: 10G
PART 4 : 15m(49ft) 4-Pin SHIELD CABLE
*No another power cable is needed to connect cameras.
*It will shield vehicle's circuit interference better than normal AV cable.
Optional Extra 5m(16ft), 10m(32ft), 15m(49ft) or 20m(65ft)
Please Kindly Note: We will send 15m(49ft) Shield Cable as default, please leave us a message for special need.
PART 5 : APPLICATIONS
The backup camera systems that will fit virtually any truck or trailer, emergency vehicle or commercial vehicle, including school buses, house boats, coach buses, Fork-lifts, motor homes and RVs!
How to Configure Your System:
It is importand before buy purchase this item, you should be conside to following questions:
NOTE 1: About this Monitor
(1) This monitor has two type brackets, one is U-bracket, the other is metal bracket, we send U-bracket as default, the metal bracket is requestion.
(2) We also can provide monitor with speaker, It can be connect one audio camera. If need it, please contact us.
NOTE 2: About the Extend 4pin Cable
This system included 15m(49ft) cables, which is connect the monitor to the cameras. Please confirm the length of your vehicle. We can provide 4PIN cables in 5m(16ft), 10m(32ft) or 20m(65ft) lengths.
NOTE 3: About the Backup Camera
(1) This camera do not has audio output, we also provide camera audio output, If need it, please contact us.
(2) We send black shell camera as default, we also provide white shell camera.
NOTE 4: About the Side Camera
We send black shell camera as default, we also provide white shell camera.
PART 6: PACKAGE INCLUDES
(1) Side View Camera x 3
(2) Rear View Camera x 1
(3) 7 inch TFT-LCD DVR Monitor x 1
(4) 15m 4-Pin Shield Cable x 4
SD Card Is Not Included In The Pack.
Items will be shipped out by DHL / FEDEX or other express operator. Please do leave us your phone number when you are buying our items, thanks!
International Buyers – Please Note:
● Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – please do not confuse them for additional shipping charges.
● Please check with your country’s customs office to determine what these additional costs will be prior to bidding / buying.
About us:
We offer Rear View Back up Camera System, Reversing Camera System, TFT LCD Monitor, Auto Shutter Camera and CCTV Camera for Car, Heavy Truck, Trailer, SUV, Farm Tractor, Forklift, Compactor Vehicle, Street Sweeper, Mobile Home, Passenger Bus and Mining Vehicle.
Why buy from us?
1. We are a high-tech enterprise engaged in researching, developing, selling and manufacturing of vehicle rear view monitor camera system, we focus on car system more then 7 year, offer a professional service and best product .
2. We choose the best materials from USA, Korea and Japan, because we need high quality material to ensure the stability of our products.
3. Our products have been waterproof test, aging test, high and low temperature test and swing test. Ensure product quality.
4. We use all-glass lens, glass lens elements from the 4-6; other factories products, most are a combination of plastic with glass lenses; Glass lens imaging effect. when your used at high or low temperatures, plastic lens will deform, the image becomes blurred. but glass lens will not.
5. We promise a 12 months' warranty for free repair or exchange. Meanwhile, we also promise our clients a whole-life repair just charge a little material fee. So we can help our clients to solve any fault in use.
We passed following six basic experimental projects.
1. Resistance to vibration test and technical graphs
Project & test conditions:
Shockproof test
Confirmation of the project:
After the test, it should meet the general performance requirements, appearance should not have the Defect to affect the actual action and the energized image function is normal.
2. Humidification and caloric test & graphs
Project & test conditions:
Set the temperature is 70℃ to -40℃ and time is 2 hours as a circle. In the non-energized state to operate 60 circles. Then after 60 circles, put the camera in the condition of -10℃ to operate for 120H, each 24H verify related functionality.
Confirmation of the project:
After the test, all the functions of the camera should meet the requirements of general performance. There should be no defect on the appearance to affect the actual action or any blur (condensation) phenomena.
3. Continuous high temperature operation test and technical graphs
Project & test conditions:
Place the camera under a humidified ambient temperature of +85 ℃ for one hour, then energized it for 96 hours. External power supply voltage of 12V DC.
Confirmation of the project:
Function can be confirmed after energizing for 96 hours. When back to room temperature, it should meet the general requirements of performance and there should be no defect on the appearance to affect the actual action.
4. Low Temprature continuous operation test& diagram of curves
Project & test conditions:
Put the camera at the environment of absence of humidity and the temperature is around -40℃ for an hour, then energized it for 96 hours. External power supply voltage is 12V DC.
Confirmation of the project:
After energized for 96 hours to confirm the function. Back to the room temperature, all the functions should meet the requirements of general performance. Appearance should not have the defect to affect the actual action.
5. Momentary power cut test and additional electrostatic test chart.
A. Momentary power cut
Project & test conditions:
External power supply voltage 12V DC at standard temperature condition, momentary power cut for 10msec. Setting one circle of power supply and momentary power cut for 3 sec, and testing 10 times. The temperature: -30℃, 25℃, 85℃.
Confirmation of the project:
After 10 circles tests, according to the quality reliability, there will be no obvious differences of the image texture. After the test, all the functions should meet the requirements of general performance.
B. Additional electrostatic test chart
Project & test conditions:
Confirmation of the project:
When the power supply voltage is ±1kV, all the functions of the camera should meet the requirements of general performance.
When the power supply voltage is ±2kV, all the functions of the camera should meet the requirements of general performance after the test.
When the power supply voltage is ±5kV, there should no damage for the camera.
6. Waterproof test & Diagram of curves
Project & test conditions:
Put one meter deep water into a container, the place 3 cameras at 1.0m, 0.8m, 0.5m three positions for 60 minutes then take them out of the water.
Confirmation of the project:
After the test, the inner box should not have water and the lens face shall not be fuzzy.
SHIPPING:
1. Items will be shipped out by DHL / FEDEX or other express operator which are the fastest.
2. We only ship to the buyer's Paypal registered address.
3. Once the full payment is received, we will ship item out in 3 days, and weekend not included.
4. After shipping we will email you the tracking No. the next day via eBay message.
5.We are not responsible for the duties, taxes at your local customs.
PAYMENTS:
1. We only accept PayPal payment.
2. We ship to PayPal's address ONLY. Please make sure your address in PayPal is matched with your shipping address before you pay.
3. Winner should deposit payment within 3 days from closing date.
4. All payment must be completed within 5 days after the auction ends, otherwise we reserve the right to cancel the order and relist the item.
5. Non-paying winners will get negative feedback and be reported to eBay for suspension.
WARRANTY & RETURN POLICY:
1. Warranty: One Year.
2. All the items are tested strictly, and are working well before shipping.
3. We will replace items which are malfunctioning items for 30 days from the date you receive them. Items which have physical abuse are not covered by the warranty.
4. Defective item should be shipped back to us for repair or exchange, and must not have any signs of abuse or intentional damage.
5. Refunds are only offered for defective products reported within 7 days upon receipt.
6. Buyer accepts responsibility to pay for return freight for any reason except DOA (dead on arrival).
Kind Note:
Don't leave Negative feedback without asking us for help. Please contact us first if you have any problem. We strive to answer all messages as quickly as possible. Thank you in advance for your patience.
FEEDBACK:
1. The POSITIVE feedback is our life, before you leave a neutral or negative feedback, please do contact us to get a better solution.
2. We care our valued customers, and will always help you. So if you have any problems please contact us immediately. Please give us the opportunity to resolve a problem, we understood the concerns and frustrations you might have, and will try our best to resolve the issues. Leaving negative feedback cannot be solve the problems, only can get negative in return.
3. All communications are handled through emails. We strive to answer all emails as quickly as possible, but due to high email volume it may take longer to reply to. Thank you in advance for your patience. Due to some ISP SPAM filter settings, you may not be able receive our email replies, please try use different email account contact.
Your buying means you agree with the above conditions and terms. Thanks for your business!