• Tempered Glass

• Sanded Edges

• Eco Friendly Ink

• Easy to Clean

• Custom Sizes on Request

The splashback is prepared for gluing to the wall with a clear silicone.

All splash panels are made of tempered glass with sanded edges with a glass thickness of 4 mm

The splash wall panel can be placed in places exposed to heat and water. 

The splashback wall panel can be fitted to any kitchen with an accuracy of a few millimetres. The pattern of the image may reflect differently depending on how the light catches it. The result is an amazing visual design.

The glass panel is also much easier to clean and maintain than the dreaded tiles that collect dirt and bacteria. Glass remains invincibly elegant, durable, aesthetic and hygienic.

The use of tempered glass has been known to increase safety by up to five times compared with standard glass.

Assets our products:
1) Tempered glass according to the standard:
Thermally hardened glass is about four times stronger than annealed glass of the same thickness and configuration, and must meet the requirements of  EN 12150 Part 1 and 2. In case of breaking it apart into many small pieces, which involves less chance of serious lacerations. A typical procedure for the production of thermally tempered glass involves heating the glass to a temperature above 600 degrees Celsius, and then rapidly cooling it to lock the glass in a state of compression and the core in a state of tensile stress, which is illustrated in the drawing. Tempered glass is often referred to as "safety glass" because it meets the requirements of the various European Building Regulations and standards defining the standards for safety glass.

2) Safety glass EN 12600
In case the laminated glass will be safe to breakage during use, the fragments will tend to adhere to the intermediate layer (PVB film), to a large extent without changing its position, thus reducing risk of injury. Laminated glass is considered "safe" because it meets the requirements of the various European Building Regulations and standards.

3) Print eco solvent
Printing eco solvent to printing inks based, among others, of lactic acid. It features higher resolution than printing a hard, less harmful to the environment, but lower durability to external conditions.

If you need a different size or design of splashback you can choose any graphic.

We can print your personalized photo as well. Please, contact us.

How do I install splashbacks?
Please, leave the double tapes on the back of the splashback. You cannot remove tapes. Please, use any clear silicone. Put a bit of the silicone on the yellow / brown double tapes. Just a little so that the silicone does not go beyond the tapes.
Then stick the panel to the wall.

Warning:

Please, make sure that your splashback will be put minimum 5 cm from the gas cooker.

Splashbacks are heat resistant, but if the flame is too large and close to the kitchen panel, it can damage the graphics.
This restriction does not apply to electric cookers.


NOTE: The images shown are for illustration purposes only and do not represent the actual product – Due to the nature of using images under glass the final product may differ slightly from one to another. 

Due to the fact that we offer a large selection of designs and sizes of our products, we manufacture our items to orders. 

Therefore, we kindly ask you to consider your purchase.