In this kit you will get 

1 x 600w LED light

1 x 1.2mx1.2mx2m Tent

4 x 10L pots 

1 x 50L Bag Canna Natural

1 x 4" Fan Kit

1 x Grow and Bloom Swift 1L

SUPERB VALUE HYDROPONIC TENT

Quality Hydroponic Grow Room Tents

95 % reflective hammered silver lining

Heavy duty zips

Metal poles (please make sure these a pushed all the way in on the side clip provided)

(we found the easiest way to put up is fix bottom half first then top part and start from the back)

LED Power: 600W 

Power Consumption: energy saving, consumes 120W

Led chip: Epistar, double chips

LED Quantity: 60PCS 10W LEDs

Coverage Area: 3 about 3.6 x 4 Square Feet ( The lighting area and the height are changeable according to different plants and environments )

Colour: red 39pcs, blue 11pcs, orange 4pcs, white 4pcs, IR 1pcs and UV 1pcs

Full Spectrum: 430~440nm, 450~475nm, 620~630nm, 650~660nm,3500K and 6000k,IR 730nm,UV 410nm

Lumen: 7124.00lm

Fan Kit

 FAN, ALUMINIUM DUCTING, CARBON FILTER, CLAMPS X 3

Air Flow

Centrifugal fan - 110 m3/h - comes with stand attached to screw to floor (can not see in picture)

Carbon Filter Size

To get the most out of your kit, please follow these few tips:

Remember, if you reverse-mount your Filter you will lose the benefit of your pre-filter and reduce the life of the carbon.

Always mount your filter as high as possible. Hot air naturally rises and so will your odours!

Try not to block too much of the filter with mounting straps or hanging devices. Use the ends of the filter to support, so not to inhibit the surface area of the filter.

Do Not mount your Filter near to humidifiers. Humid air over 85% may enter the filter rendering the activated carbon ineffective and your filter may NOT neutralise odours!

Ensure you have an airtight seal around the connection of your filter to ducting or extractor fan.