SUICIDE 2015-2019 Ford Mustang S550 Side Skirt Extensions (Side Rocker Panel Extensions/ADD-ON's)
SHIPPING ONLY AVAILABLE TO THE LOWER 48 US STATES & CANADA
Sculptured and developed in-house by an exotic body
kit enthusiast. Each set of our S550 side skirt extensions provides
cutting sharp lines to enhance and manifest the spirit of speed. Our
design empowers our drivers to reflect their individualism, enhancing
street race style and credibility.
We didn't compromise on the material and costs as we know that the "Gloss Finish" will be the BEST
finish for the S550 and also after looking for the best material the
"Polycarbonate" would be our first choice for the side skirt extensions
as it has amazing qualities compared to other materials out there! It's
much better than ABS & HDPE, there's absolutely no comparison in
finish quality and durability! THE PICTURES WILL SPEAK FOR ITSELF!
NEW 2018 EXOTIC SUICIDE S550 SIDE SKIRT'S FOR ALL S550 2015-2018 FORD MUSTANG'S MODELS! (NOT COMPATIBLE WITH SHELBY GT350 & GT350R MODELS) PLEASE CHECK WITH FORD TO VERIFY IF SIDE ROCKER PANELS ARE THE SAME AS 2015-2018 FORD MUSTANG MODELS BEFORE PURCHASING)
GET THE "WIDE BODY LOOK" WITHOUT HAVING TO MODIFY OR REMOVE YOUR STOCK ROCKER PANELS!
Advantages of buying our 2015-2018 Ford Mustang S550 Side Skirt Extensions:
- It will give your car the "Wide-Body" look and also a much meaner stance without having to do any modifications to your car!
- The "Super High gloss Black Finish" looks amazing and will outshine any other material compared to ABS or HDPE.
- It is impact resistant. Polycarbonate is up to 10 times more impact-resistant than any other plastic or glass.
- UV Protection: It provide 100% protection from the sun's harmful UV rays.
- This
add-on will completely change the look of your car and it's 1/4" Inch
thick which completes the look of the side skirt extensions!
This "WILL NOT" replace your stock rocker panels and will screw and tap onto your stock S550 rocker panels within 30-60 minutes with an right angled power drill. Doing this by hand will take a little longer but if you can jack up the vehicle this will give you the high to easily drill the self tapping screws in easily and you should be done in no time!
If you don't have any jack stands we highly recommend you bring it into an auto body shop to have this installed for easier installation.
Includes: A pair of Suicide S550 side skirt extensions (Left & Right)
INSTALLATION INSTRUCTIONS:
Important Note: You will need size 7 (1 inch) self tapping screws.
Installation takes 30-90 minutes time if you are doing this by hand or with a drill.These
S550 side skirts have been bent to accurately fit your 2015-2019 Ford
Mustang models. When visually looking at your stock side rocker panels
or side skirts it might seem and look straight from a standing point but
underneath it is not straight and it actually bends upwards to a
certain degree.
1) Before doing any drilling please make sure to ONLY remove the protective film on both sides but just to the "Bent Line/Marker" and do not go past it. The marker is "Marker/Bent Line"
where you are suppose to align your new S550 side skirt extensions to
the edge of your stock S550 rocker panels or your side skirts. By not
peeling off the complete protective film this will prevent scratches and
other mishaps that can happen when you're trying to install this.
2) Insert your first screw starting from the rear
of the car and make sure the side skirt extension is tucked in and
sitting back as furthest as possible and your bent line/marker "Located
Left to Right on your new extensions" is aligned with the edge of your
stock rocker panel.
3) Now go to the middle of the side skirt and
insert that screw making sure you are aligning the indicated marker to
the stock rocker panels.
4) STEP 4 YOU WILL NEED ANOTHER SET OF HANDS TO MAKE THIS PART EASIER!
Don't be afraid of bending this material as it
won't break and in this step have someone hold and align your side
skirts extensions aligning the marker to the front area of your stock
rocker panels. Once you have aligned your new side skirts to your stock
rocker panels both front and rear markers should come out approx. 3/4
inch from your stock rocker panels.
5) Once you have these areas screwed in now
you can complete the rest of the installation and insert the screws from
left to right on all holes furthest to the back and go as tight as
possible! When you do the holes that are closest to the front of the new
side skirt extensions "DO NOT" over tighten as these screws are
just there to keep the front steady and secure. By tightening the rear
areas more than the front line of screws this will make your extensions
point downward and align straight beside your stock rocker panels.A good
rule of thumb to remember is for the front line of screws just make
them tight enough so there is no gap between your stock rocker panels
and your new side skirt extensions!
Please keep in mind that you will need to tighten
one area, walk back, observe and you will have to either tighten an area
more or loosen some front screws to make your side skirt extensions
look straight which can take some time and this is why it's very
important to not tighten everything at maximum torque until you can
visually see which areas will not to be loosen or might need more
tightening. The stock side rocker panel moulding is made of thick and
very thin ABS plastic and not every rocker panel for every build on the
S550 will have identical matching side rocker panel moulds so this is
why you need to follow these installation instructions and also
understand that the S550 injection mould from our stock rocker panels
might have imperfections underneath that we don't see!
You will notice some areas of your stock rocker
panels will be easier to insert the screws and some areas much more
difficult especially doing this by hand and not using a drill but once
you have your new side skirt extensions installed and looking the way
you want it will all be worth it!