Sie bieten hier auf das folgende Gerät:
Der Nachbau eines MM-Phono-Vorverstärkers von Nelson Pass, dem XOno. Es wurde lediglich der MM-Teil aufgebaut. Ein Komplett-Gerät mit MC-Teil biete ich in einer anderen Auktion an.

Es handelt sich um die symmetrische Version. Das Gerät besitzt einen XLR- und einen Cinch-Ausgang. 

Technische Daten der XOno laut PASS Labaratories:

Verstärkung:                                40 dB @ 1kHz (MM) fixed output

RIAA Entzerrung                           +/- 0,1 dB 20Hz – 20kHz

Verzerrung                                   > 0,05% THD @ 20V bal @ 1kHz

Maximale Ausgangsspannung:   20V rms

Ausgangsimpedanz:                    300 Ohm

Eingangsimpedanz:

MM:                                               47kOhm/Kapazität durch DIP-Schalter einstellbar (50pf bis nach Wunsch)

Fremdspannungsabstand:          -90dB bei 10mV

Die Farbe der Frontplatte kann gewählt werden: Silber oder Schwarz. 

Für weitere Fragen können Sie mich gerne anmailen.
Das Gerät kann in Duisburg Probe gehört werden. Gegen Zahlung einer Kaution, können Sie ein entsprechendes Leihgerät erhalten. Wenn Ihnen das Gerät nicht zusagt, zahlen Sie lediglich die Rücksendung

technische Details:
Das Gerät ist zusätzlich mit einem hochwertigen Netzfilter ausgerüstet. Netzkabel von Ölflex mit Rhodium beschichteten Stecker.
Netzteil:
Auf der Gleichrichterplatine werden ultrafast Dioden mit parallel geschalteten Kondensatoren von Wima verwendet. Gesiebt wird in CLC-Technik. Auf zwei weiteren Platinen wird mit einstellbaren Spannungsreglern jeweils eine symmetrische Gleichspannung von +30V/-30V erzeugt. Diese Spannungen lassen sich per Präzisiontrimmer einstellen.
Hauptplatinen:
Als Widerstände sind 0,6W Metallfilmwiderstände mit 1% Toleranz von Yageo eingesetzt. Als Elkos jeweils FCA oder NGH von Panasonic.
Alle Halbleiter wurden sorgfältigst selektiert (gematched). 
Beide Konstantstromquellen wurden penibel ausgemessen und angepasst.
Als Ausgangskondensatoren habe ich NOS Ware von Ero Roederstein benutzt.
Im RIAA-Bereich sorgen hochwertige Polystyrol Kondensatoren mit max 1% Toleranz für eine an die RIAA-Kennlinie angepasste Entzerrung. 

Falls Sie mit diesem Gerät nicht zufrieden sind, dürfen Sie es innerhalb von 30 Tagen selbstverständlich zurück geben. 
Auf die einwandfreie Funktion leiste ich ein Jahr Garantie.

Mit einem Gebot akzeptieren Sie, dass ich als als Privatmann verkaufe und daher keine Gewährleistung nach den EU-Richtlinien leiste.

You are bidding here on the following device:
The replica of a MM phono preamplifier from Nelson Pass, the XOno. Only the MM-part was built. A device with an MC-part I offer in another auction.

It is the balanced version. That means the device has a XLR and a Cinch output. 

Technical data of the XOno according to PASS Labaratories:

gain:                                   40 dB @ 1kHz (MM) fixed output
RIAA equalisation              +/- 0.1 dB 20Hz - 20kHz
Distortion                            > 0.05% THD @ 20V bal @ 1kHz
Maximum output voltage:   20V rms
Output impedance:             300 Ohm
Input impedance:               47kOhm/capacitance adjustable by DIP-switch (50pf up to your choice)
Signal to noise ratio:          -90dB at 10mV

The colour of the front panel can be selected: silver or black. 

For further questions you can email me.
The device can be heard in Duisburg Probe. Against payment of a deposit, you can get a corresponding rental device. If you do not like the device, you only have to pay the return shipment.

technical details:
The device is additionally equipped with a high-quality mains filter. Mains cable from Ölflex with rhodium-coated plug.
power supply unit:
On the rectifier board ultrafast diodes with parallel connected capacitors from Wima are used. Screening is carried out in CLC technology. On two further boards a symmetrical DC voltage of +30V/-30V is generated with adjustable voltage regulators. These voltages can be adjusted by precision trimmers.
Main boards:
As resistors 0.6W metal film resistors with 1% tolerance from Yageo are used. As electrolytic capacitors FCA or NGH from Panasonic.
All semiconductors were carefully selected (matched). 
Both constant current sources were meticulously measured and adjusted.
As output capacitors I used NOS products from Ero Roederstein.
In the RIAA range, high-quality polystyrene capacitors with max. 1% tolerance ensure equalisation adapted to the RIAA characteristic curve. 

If you are not satisfied with this device, you may of course return it within 30 days. 
I offer a one year warranty on the perfect function.

With a bid you accept that I am selling as a private person and therefore do not give a warranty according to the EU directives.