We've been in the appliance repair business for just under 20 years. We started in the 90's but as time went on, we noticed that appliances are equipped with many more computer components than in the past. In fact, many technicians have completely gotten out of the business due to that! But we adapted and began doing those repairs as well and over time, we added that skill set to our services. If you're in the Palm Beach area, we are available to come to your home to repair your appliance and if need be, take the bad circuit board with us for repair.

Below you'll find an extensive list of boards we repair. Our goal is to earn your business through cheap pricing, decent turnaround time and overall good communication. Please send us an email with the picture of the board, model number and issue you're having and we'll tell you if it can be repaired. I can tell you that we are cheaper than the competition because we don't have a lot of overhead. I can also tell you that we replace the bad parts, test all and additionally replace more common parts that tend to go bad, even if they're still O.K. Our turn around time is 3-5 days, unless we need to order an odd relay or eeprom chip. If you need it done faster and we have everything we need, we'll put it in front of the rest of them. Just make note of that on the paypal receipt. The boards are checked thoroughly. The boards come with a 1 year warranty. You pay shipping only, we cover parts. So if you have an underlying problem that is the cause of the board repeatedly going bad, we'll fix the board for up to 1 year of payment date, if needed. Email with questions and thank you for your business!

Please make sure that the board is the same in the picture. Look at the side with the relays, NOT JUST THE FACE PLATE. The board needs to be the same in order for our equipment to analyze it.

Should you see "free shipping" in any of our repair ads, it means that we cover the shipping back, it does not mean that we pay for you to ship your board to us. Please do not ask us for a shipping label.

For boards that are encapsulated in a shell, PLEASE remove the shell before mailing. It makes it lighter to ship and easier on us since we have to spend time figuring out how to remove them without hurting them. For us, it takes time due to the number of stuff we get in so please remove it.
Thank you for your business!

PAYMENT ACCEPTED VIA PAYPAL

Should there be an issue that is not repairable, as of June 18th, 2021 we are now charging a diagnostic fee of $49. Please read and understand this and do not make the purchase if you're not comfortable with that. We will also add the shipping charge as well. There is a reason for this new fee. Over the years, ebay has been charging seller fees on repairs that we have refunded due to the board not being repairable. We've lost a lot of money in the past and it's impossible to keep up with the fees that we're being charged. Now, should the board arrive and we deem it to be not repairable without spending anytime on it, you will NOT be charged this $49 fee. Should you want the board back, you simply pay shipping. We ask that you pay for the board to be returned, we do not need any more boards. 
*Note We have the tools necessary to thoroughly check all parts on the board, including the main microprocessors and you will know whether or not the board is good and can be repaired or if it's not repairable soon after receiving it.
For any boards in METAL or HEAVY casings, please remove before mailing. If not removed, an additional charge will be invoiced based on the total additional weight of the board.
Using the "self clean" mode WILL void your warranty. This option should not be used on any oven, much less an oven with a board that was worked on. It's dangerous and can damage the board. Thank you!

Obviously we're not here to collect your info. In fact, we could care less about your info, we just want to get your appliance up and running again!

How long will it take to repair your circuit board?
Most circuit boards can be repaired in just a day or two. If you don't see your board on the list, please feel free to inquire about time and if your board is approved or not. Some boards we simply do not do. For example, boards with a layer of wax covering them are generally off our list of approved boards.

What happens if you cannot repair my board?
If your board cannot be repaired due to it having a bad processor or because the board is too badly damaged or if it just simply cannot be repaired, then we will refund your money less shipping back to you. If you'd like your board mailed back to you, you will have to pay for that. If you don't see your model's board on the list of approved boards or under your brand, then please contact us before you mail it in to confirm the repair. Do not just send it in without doing the aforementioned. Doing so may delay your return time and cause overall confusion on our end.

Is there a warranty on the repair?
All boards come with a 1 year warranty. What that means is that the board will be repaired again should something happen. But because the board's problem might be different from the first time around or because the board might be too badly damaged from a lightening storm or surge, we cannot refund your money. The only time a refund will be given is if the board cannot be repaired when it is mailed in the first time around. Don't worry though, if your board has a problem down the road after it was repaired, we'll do everything we can to get it back to normal! We only require that you cover shipping costs back to you.

Is shipping included?
Yes, shipping charges are included in the original purchase. You will only have to pay for return shipping costs should you ship it in after it is repaired for additional repairs.

Can we talk to someone about our machine and the problems it's having?
Yes, we understand that sometimes you might get stuck and may need our help. Each customer is treated individually and our lines are open for easy communication between ourselves and the customers. We simply ask that you do not abuse the our services and take up too much of our time. We've been known to spend a lot of time on the phone when customers are having issues or can't remove the board or are having an issue locating something. We don't mind helping, just call.

If you are happy with the product please leave positive feedback and we will automatically leave positive feedback for you. If there is something wrong with the product, you have received for any reason, please contact us first to resolve. Please avoid making negative feedback remarks, contact us first if you have any problems! And please don't jump to conclusions, if you have any questions, simply reach out. We're not here to cause you problems. We are here to help you get your appliances back up and running.

Please ask us for the shipping address after you have made the purchase.