SLA 3D Printer Kudo3D Titan 1. Like new. Easy  upgrade to Titan2. 
-Titan Small Build Platform
-Titan Large Build Platform
-Titan PSP Resin Container
-and also some resin.

Some of the features of the printer are as follows.

  • Build volume of the Titan 1 is 7.5″W x 4.25″D x 9.5″H (19.2cm x 10.8cm x 24.3cm)
  • Resolution of the machine is 37μm to 100μm on the X and Y axes and 1μm on the Z axis
  • XY resolution of 25μm and
  • Z resolution of 300μm
  • Speed: 1.3 – 2.7 in/hr for of 100μm
  • Material: Photo Resin
  • Technology: DLP-SLA with PSP

1. In terms of printing size, Titan 1 can print up to 9.5” tall with a 7.54” x 4.25” build base at 100 micron XYZ resolution, which is the tallest among all personal SLA printers.In addition to bigger prints, Titan 1 can print multiple objects at the same time.

2. Titan 1 is the fastest personal SLA printer in the market today. For other SLA printers to print a 4.6 inch Eiffel tower with 100 micron Z resolution, it takes anywhere from 4 to 6 hours. With Titan 1, it only takes 2 hours. Titan 1's maximum speed for xy:50μm and z:100μm resolution is about 2.7 inches / hr and 1.3 inches / hr for xyz:100μm resolution. Compared with FDM type 3D printers, Titan 1 is five times faster and has much better resolution and surface smoothness.

3. Titan 1 can print at resolutions that are 5 times better than FDM printers while completing the project at a faster speed. Titan 1 can print pillar features as fine as a strand of hair. The small Eiffel tower above is printed at 37 micron XYZ resolution. The mini rings below are printed at 37 micron XY and 30 micron Z resolution.