Installation Guide
1. Before screwing your louvre galleries to your window reveals,
ensure that the frame is completely square. This will ensure proper
operation of the mechanism and no tapering gaps between the louvre
blades.
2. Screw the galleries to your reveal ensuring each side is exactly
parrallel to the other. Given the reveal is ?Plumb? on all sides, this
can be done by marking a guideline down each window jamb at an equal
distance from the edge of the jamb.
3. To make blade insertion easier spray the ends of the glass with soapy water.
4. Ease back the ends of the plastic retaining clips and slide your
louvre blades in from the inside. Start from the top and work your way
down for safety on a large window.
5. If you are installing a weather stop bead top and bottom for the
blade to close against: First lock the blades shut then postion the
beads. They should be close to, but not pushing against the blades. At
the bottom run a bead of sealant under the stop bead prior to fixing for
a better seal.