See description below..
Fabulous 320 x 240 Colour Touch display (64,000 colours) with SPI interface and SD Card slot
Features:
This is a new 2.8 inch serial SPI color display module with touch function.
Support analog SPI and hardware SPI.
Socket for sd card.Module (including power supply IC, ), compatible with 5110 interface.
3.3V-5V POWER with 3.3V logic.Specifications:
Resolution: 240x320
Driver IC: ILI9341Input Voltage: 5V/3.3V
Colours: 64k
Click image below for video showing how to use with Arduino/ESP32/ESP8266
| Name | Parameter |
| Display Color | RGB 65K color |
| SKU | have touch screen: MSP2807 |
| have no touch screen: MSP2806 | |
| Screen Size | 2.8(inch) |
| Type | TFT |
| Driver IC | ILI9341 |
| Resolution | 320*240 (Pixel) |
| Module Interface | 4-wire SPI interface |
| Active Area (AA area) | 43.2x57.6(mm) |
| Module PCB Size | 50.0x86.0(mm) |
| Operating Temperature | -20℃~60℃ |
| Storage Temperature | -30℃~70℃ |
| VCC power voltage | 3.3V~5V |
| Logic IO port voltage | 3.3V(TTL) |
| Power Consumption | TBD |
| Rough Weight(Package containing) | No touch: 34(g) / With touch: 43(g) |
| Number | Pin Label | Description |
| 1 | VCC | 5V/3.3V power input |
| 2 | GND | Ground |
| 3 | CS | LCD chip select signal, low level enable |
| 4 | RESET | LCD reset signal, low level reset |
| 5 | DC/RS | LCD register / data selection signal, high level: register, low level: data |
| 6 | SDI(MOSI) | SPI bus write data signal |
| 7 | SCK | SPI bus clock signal |
| 8 | LED | Backlight control, high level lighting, if not controlled, connect 3.3V always bright |
| 9 | SDO(MISO) | SPI bus read data signal, if you do not need to the read function, you can not connect it |
| (The following is the touch screen signal line wiring, if you do not need to touch function or the module itself does not have touch function, you can not connect them) | ||
| 10 | T_CLK | Touch SPI bus clock signal |
| 11 | T_CS | Touch screen chip select signal, low level enable |
| 12 | T_DIN | Touch SPI bus input |
| 13 | T_DO | Touch SPI bus output |
| 14 | T_IRQ | Touch screen interrupt signal, low level when touch is detected |
Package Includes:
1 x Display Module