1 set = 4 wires
The 30AWG PERFECT CRYSTAL OCC (PCOCC) wire is 0.55mm outer diameter. It's litz construction 7 strands and each strand is 0.1mm diameter 99.999% 5N PERFECT CRYSTAL OCC (PCOCC) wires in oversized PTFE Teflon insulation for a more cleaner sound. Woven Teflon Litz construction is ideal to deliver RFI and EMI rejection and provides low capacitance. High grade Teflon insulation gives a predominant air dielectric and is regarded as the best insulator for bare cable.
PCOCC is some of the finest copper wires available for audio and lends itself perfectly to the delicate signal transfer between your cartridge and headshell.
Unlike common manufacturing processes, the PCOCC copper wires undergo a tightly controlled and extended cooling process resulting in an ideal, homogeneous structure.
This 5N (
99.999%)
PCOCC materials is from FURUKAWA JAPAN.
Every piece leadwire is made of 2 pieces transparent 30AWG PERFECT CRYSTAL OCC (PCOCC) wires and litz construction for much more cleaner sound. That's means every one set leadwire we use 8 pieces 30AWG PERFECT CRYSTAL OCC (PCOCC) wires.
CARTRIDGE CONNECTOR CLIP Made of high quality copper with high conductivity good 24K gold plating. All components are RoHS Compliant.
Compression type clips will fit all modern round cartridge pins sizes: 0.0492 inches / 1.25 mm nominal, and will also fit round cartridge pins from 0.0472 inches / 1.20 mm to 0.0512 inches / 1.30 mm
Length: 2 inches (50mm) long with female connector sockets on each end
Mount on cartridge according to the color of shrink tubing:
BLUE = LG (left ground)
GREEN = RG (right ground)
WHITE = L (left positive)
RED = R (right positive)
|
Never miss my new auctions on eBay. Just click on the „Follow“ / „Folgen“ button on the NEXT PAGE |
If you have an interest to custom-made headshells made of exotic woods or carbon please click on the image below:
If you need the screw kits please click on the image below:
If you need the headshell wires please click on the image below:
If you have an interest in universal spacers, weights and dampers for headshells and phono cartridges please click on the image below:
https://www.youtube.com/watch?v=hKrOf39GkJ4
If you have an interest in exclusive custom-made wood bodies for Shure V15 Type III phono cartridges please click on the image below:
https://www.youtube.com/watch?v=FyPxDnptPPk
If you have an interest in exclusive custom-made wood bodies for Audio-Technica AT95 cartridges please click on the image below:
https://www.youtube.com/watch?v=vwzJlxy8ws0
If you have an interest in special spacers, weights and dampers for SME 3009/3012 headshells and phono cartridges please click on the image below:
