Specification:

             

             

Technical Data:

             

Input Power:DC10V-14V

             

Standby Current:<5MA

             

RF Frequency: we default send 315M (Note: If you need more the 433M version,pls contact us.)
              

RF working mode:superheterodyne

             

Receive sensitivity: >97dbm

             

Transmitting distance:>100m ( open space)
             in theory, it is 100 meters( open space,vacuum space). but in reality, it is about 15 meter ~ 30 meters.

             

Decoding mode:MCU software decoding

             

Remote storage:50pcs

             

Support remote type: Learning code, Fixed code(Rolling code can be design)

             

Working mode:Momentary, Toggle, Latching Time delay (5s ,10s ,15s )

             

Wiring type:fixed terminal

             

Output Terminal :NO , NC , COM

             

Dimension of PCB:35*30*18mm  (L,W,H)

             

Wiring diagram 1:          

             

+V : 12V + input ;

             

- V:  12V - input ;

             

NO:  Output , normal open;

             

COM:Output , common ;

             

NC:  Output , normal close;

             

About Working mode:

             

Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.

             

Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .

             

Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.

             

Tiem delay mode :Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s , the relay disconnect automatically .

             

Clearing the code :

             

Push the learning button on the receivers for 8 times , the codes will be cleaned .

             

After clearning the code, all the remote control cannot work any more.

             

Learning the code :(momentary)

             

Push the learning key on the receiver once time , it comes into momentary setting mode .

             

Wait for a moment , the LED will be off , it comes into learning state .

             

Push the remote button , LED indicator on the receiver board will flash then come off .

             

After 3 seconds, the LED indicator will be on again , learning successfully .

             

Learning the code : ( Toggle )

             

Push the learning key on the receiver twice time , it comes into toggle setting mode

             

Wait for a moment , the LED will be off , it comes into learning state .

             

Push the remote button,LED indicator on the receiver board will flash then come off.

             

After 3 seconds , the LED indicator will be on again , learning successfully .

             

Learning the code :( Latching )

             

Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for "ON", the second time learnt for "OFF".

             

For example : button A = ON , button B = OFF

             

Push the learning key on the receiver triple time , it comes into latching mode .

             

Wait for a moment , the LED indicator on the receiver board will flash then come off.

             

Push the remote button A .

             

LED flash for 5 times .

             

Push the remote button B .

             

Led flash for 5 times .

             

After 3 seconds , the LED indicator will be on again , learning successfully.

             

A = ON , B = OFF .

             

Learning the code :( Time delay mode )

             

Push the learning key on the receiver forth time , the time dealy for 5 seconds .

             

Push the learning key on the receiver fifth time , the time delay for 10 seconds .

             

Push the learning key on the receiver sixth time , the time delay for 15 seconds .

             

The LED indicator will be off .

             

Push the remote button , LED flashes and off .

             

After 3 seconds , the LED indicator will be on again , learning successfully .

             

NOTE: The system can store for 50 pcs of remotes , if the remote get more than 50pcs , the initial remote control will be lost .

                           
             

Package Include:

             

1 x 1-channel relay receiver board
             

1 x remote control
             

1 x cover case

             

             
             

             

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

             

Older version Description:

             

             
             Specification:

             

1, working voltage: DC 12V

             

2, Static current: less than 6mA

             

3, working temperature: -40℃ - +80℃

             

4, the receiving sensitivity is not less than -105dBm

             

5, working frequency: 315MHz

             

6, Remote control distance: in theory, it is 100 meters. but in reality, it is about 15 meter ~ 30 meters. 

             

7, Board size: 34mm * 31mm * 18mm
             8, Relay Capacity: 10A 250VAC / 10A 30VDC
             
             Notes ： the 23A 12v battery for the remote in not include, the airmail ban battery.
             
             

             

Wiring reference:
             

             

             
             
             

             

             Three Working mode:
             

             

Momentary: Press and hold->On; Release->Off  (defauft.)

             

Toggle/Self-Lock: Press->On; Press again->Off

             

Inter-Lock: Press->On; Press other button->Off
             

             

             
             

             

Package Include:
             1x 1-channel relay receiver board

             

1x remote control

             

1x cover case