EPDM Rubber Roofing Adhesive Waterbased & Contact Bonding Glue Permaroof UK

Fast and Free Delivery
Trusted Brands
60 Day Returns
Great Feedback

Description

Permaroof EPDM Adhesive

Waterbased & Bonding

Available in 2.5L, 5L & 10L

Choose from the drop down box above

Free Delivery!!! for mainland uk only (offshore or Scotish Highlands may be more)

Orders placed before 12 noon Monday - Friday will usually be delivered the next working day (excluding bank holidays)

01773 608808 or 0800 161 3722 scott @ permaroof .co.uk

Waterbased Adhesive Application

This adhesive should be used on flat timber surfaces, not suitable for brickwork.
Apply even coat to timber deck using a 9" emulsion roller.
Mate the two surfaces and follow with a brooming over the membrane to ensure proper bonding.
Avoid globules and puddles allow to tack off before mating.
For best results apply Permaroof Deck Adhesive to smooth, dry timber surface.
Use only when temperatures will not fall below freezing at any time 24 hours after mating with EPDM.

COVERAGE

2.5L Coverage Approx: 10 - 12m2 on to dry timber 
5L Coverage Approx: 20 - 22m2 on to dry timber
10L Coverage Approx: 40 - 44m2 on to dry timber


Bonding Adhesive Application

Can be used onto Timber, Brick, Metal, Glass, Most plastics, concrete and any other smooth dust free surface.
Apply even coat to both surfaces using a 4" emulsion roller, allow to tack of before mating to avoid air bubbles.
Mate the two surfaces and follow with a brooming over the membrane to ensure proper bonding.
 
For best results apply Permaroof Bonding Adhesive to smooth, dry, dust free surface.

 Preparation

Surfaces on or against which Bonding Adhesive is to be applied must be clean, smooth, dry and free of sharp edges, loose materials, oil, grease and other contaminants. The mating surface of the membrane shall be cleaned with a brush or clean rag. Stir the adhesive thoroughly before and during use, achieving a uniform mix with no sediment on the bottom and no marbling evident. Restore the adhesive to room temperature prior to use, if exposed to temperatures lower than 15 degrees for a prolonged period.

Coverage

The Adhesive must be applied at a uniform rate to both the membrane and the roof substrate. Coverage rates depend on smoothness of substrate and method of application. 

2.5 Litre Tin - approx 5m2

5 Litre Tin - approx 10m2

10 Litre Tin - approx 20m2

Storage

Store in original containers at temperatures between 15 - 25 degrees. Keep the material out of direct sunlight until ready for application.

Shelf life - 12 months, when stored in above-mentioned conditions.

Precautions

Flammable. Keep away from sources of ignition. Do not smoke when using. For professional use only. Use only in well ventilated areas. Avoid contact with skin and eyes. Keep out of the reach of children.

Registration No. 05713937 - Registered in England & Wales.
Registered Office: Unit 1, West Way, Cotes Park Ind Est, Alfreton, Derby, DE55 4QJ.
Telephone: 01773 608808

Free Installation guides available via e-mail or post, please ask for details.

We supply a wide range of roofing materials so please see our shop or call for more details.