Semi-rigid, Encapsulated-Lined, Polyolefin Heat Shrink Tubing - 3/16" (4.8/1.5mm I/D)
Supplied as 1.2 mtr lengths
***Please note this price is inclusive of VAT. A full VAT invoice can be provided upon request***
SCL is encapsulant-lined, heat shrinkable tubing that provides moisture resistance, strain relief, and electrical insulation for electrical splices, terminations, breakouts, and mechanical connections. SCL is constructed as a dual-wall tubing. The outer wall is a semirigid, crosslinked polyolefin, while the inner wall is a meltable polyolefin that flows with the application of heat.
Encapsulates components, splices and terminations where moisture resistance and mechanical protection are required. The encapsulant melts and flows to fill surface irregularities of the substrate. While still hot, the tubing can be blocked to form a wire breakout.
Raychem SCL is designed to provide one-step moisture-proof of a wide variety of electrical parts when applied.
Manufactured from radiation cross-linked polyolefins, SCL has an inner wall that melts when heated and is forced into the crevices and interstices by the shrinking action of the outer tubing. When cooled the entire mass becomes a rigid, tough, homogeneous covering with controlled wall thickness. SCL shrinks between 17% and 40% of its supplied diameter according to size and therefore few sizes are required to cover a range of irregular shapes with widely varying dimensions.
Unaffected by most solvents and chemicals and non-corrosive in contact with electrical joints, SCL also has high dielectric strength.
Other sizes available upon request.
_____________________________________