Antelco Snap-On Filter 19mm

This Antelco SNAP-ON tap adaptor lets you connect a hose/LDPE pipe to the regular 19mm barb whilst retaining a quick SNAP-ON (Female) connector at the other end. In-between, a filter (which can be disassembled) prevents particles in the water flow from reaching your emitters and clogging. This lets you connect/disconnect irrigation set ups to your mains flow quickly and easily.

Antelco 19mm Double Barb Elbow Connector

Use this 19mm Antelco Double Barb Elbow Connector to guide your system around corners to avoid kinking the pipe.

• Premium quality product made by Antelco, Australia

• Fits 19mm ID (internal diameter) pipe/hose

• Double barb for increased retention

• Sharp-edged barbs create leak-proof seal

• UV stabilised plasticfor long life

Antelco 19mm Double Barb Tee Connector

Antelco have designed this 19mm Double Barb Tee acetal connector from high quality materials to be heat, chemical and wear resistant. In addition thedesign is double-barbed to offer a long term reliable connection between the pipe and connector. Useful for adding an additional line to an irrigation system. Using this fitting you can allow for further lengths of supply pipe to be connected and therefore the number of emitters and/or soaker hose.

Antelco 19mm End Plug / Repairing End Line

Essential component for sealing the end of pipe in low pressure micro irrigation systems.

Used in conjunction with standard low pressure tubing.

Antelco fittings are practical and durable.

Antelco 19mm Green Back In-Line Valve

An on-off and variable flow control valves for use in low pressure irrigation systems.

Features:

• Vari-Flow? model allows for variable flow control by rotating the cap

• Green Backvalves designed for simpleon-off operation and straight through flow

• Green Back cap for standard irrigation applications

• UV stabilised materials for long life

Antelco 19mm Straight Joiner

The Antelco 19mm Irrigation Joiner is a high quality, barbed joiner for connecting 19mm hosing.

For extra security, we recommend the use of a ratchet clamp to prevent pipe from slipping. Manufactured from high quality materials to be heat, chemical and wear resistant. Use in conjunction with standard low pressure tubing. Antelco fittings are practical and durable.

Features

• Single barb connection

• UV stabilised materials for long life

Antelco 19mm to 13mm Reducing Tee

This item has 3 points of connection, two of these measure 19mm, the other is 13mm in diameter. This Reducing Tee can be used to very easily install offtakes of 13mm irrigation pipe to 19mm supply pipe or LDPE. Designed to reduce the chance of leaks or 'pop offs' throughout your garden irrigation systems. To install this Antelco 19mm to 13mm Reducing Tee, cut the 19mm pipe in the desired location, insert the reducing tee in-line of the pipe, then push the 13mm supply pipe to the outlet.

Antelco 25mm to 19mm Reducing Tee

Connects two lines of 25mm to one line of 19mm. Antelco have gotten the design for this item down to a tee! Pun absolutely intended.

Features:

• Fits 25mm pipe and 19mm pipe including, LDPE, standard garden hose, PVC irrigation pipe, Hozelock, Drip-Line and soaker hose

• Sharp-edged barbs create leak-proof seal

• Operating pressures should not exceed 300 kPa- (pressure regulators are available from our shop if needed)

Antelco 3/4inch BSPF - 19mm Nut and Tail Connector

Features a rubber washer inside the Female thread to ensure a watertight seal. Use for connecting onto all your sprinklers and other 3/4 inch garden fittings. To connect to your 19mm pipe more easily, warm the pipe and push over the barb fitting.

Antelco In-Line Barb Filter 19mm

Featuring two 19mm barbs. In-betweem, a filter (which can be disassembled and cleaned) prevents particles in the water flow from reaching and clogging your emitters.

Antelco Snap-On Connector (Female) to 19mm

This Antelco Snap-On male tap adaptor lets you connect a hose/LDPE pipe to the regular 19mm barb and features a male Snap-On quick connector at the other end. This lets you connect/disconnect systems to your mains water supply quickly and easily.

Antelco Snap-On Connector (Male) to 19mm

This Antelco Snap-On connector lets you connect an LDPE pipe to the 19mm barb whilst retaining a quick SNAP-ON (Female) connector at the other end. This lets you connect/disconnect systems to your mains flow quickly and easily.

Antelco Saddle Clamp 19mm

For use with regular hose (22mm maximum outer dimension) piping/hosing. Used with polyethylene tubing in low pressure irrigation systems. Features UV stabilised materials for long life.

Antelco Asta Hose Hold Down Stake for 13mm-19mm

This Asta Hold Down Stake is perfect for holding down/securing drip, micro irrigation systems and LDPE piping up to 22mm in diameter.

UV stabilised materials for long life. Length: 17.5cm.

Antelco Double Barbed Reducing Joiner - 25mm to 19mm

This Double Barbed Reducing Joiner is a high quality acetal fitting and provides high retention in low pressure poly (LDPE) tubing for long-term reliability of connections.

Features:

• Double barb for increased retention

• Sharp-edged barbs create leak-proof seal

• Increased strength and superior quality

• Heat, chemical and wear resistant

Antelco Double Barbed Reducing Joiner - 19mm to 13mm

A 19mm to 13mm straight joiner. Ideal for connecting 19mm (Internal Diameter) to 13mm (Internal Diameter) hose. Perfect for use in your low pressure micro irrigation system.

Double barbed to ensure a lasting watertight seal.

Antelco - Double Barbed Joiner - 19mm to 19mm

This Double Barbed Straight Joiner is a high quality acetal fitting which provides high retention in low pressure poly (LDPE) tubing for long-term reliability of connections. Perfect for connecting 19mm to 19mm pipe or for fixing areas that leak.

LDPE Pipe 19mm - (18mm ID, 20mm OD)

• 'Pack Quantity' refers to the length of pipe in meters

• 18mm internal diameter

• 20mm (3/4 inch) external diameter

• Perfect for our range of 19mm fittings and connectors

• 2mm wall thickness

• High UV resistance and 100% crack-resistant

• Resists kinks and damage caused by routine landscape maintenance activities

• Operating water pressure rating: up to 4 bar

• For domestic and commercial irrigation systems

Please be aware this is a pipe not a garden hose. This LDPE pipe should NOT be used to carry human drinking water. The pipe will resist damage from frost during the winter months, but you should be sure to drain the pipe as expanding water will cause damage. Puncture with a hole punch for off-taking to irrigation. Compatible with all of our 19mm fittings.

Working in cold temperatures: LDPE pipe can be inflexible and difficult to handle in cold weather. We recommend that installation is best done in temperatures above 10C, the warmer the better. LDPE pipe is more inclined to kink and split when handled roughly in freezing temperatures. To make working with this pipe easier, place it in warm water before attaching fittings.

Whilst we only charge 99p for a sample of this pipe, just ask for sample when you place an order with any of our products and we will happily include a piece, free of charge.