Klotz Neutrik Tour Grade Heavy Duty Lead Quality At Its Best

Custom Made To Order

Choose your length from 10cm to 30m from the drop down menu.

Choose your Colour of cable Black Red Yellow Green Blue Grey White

Klotz professional fully balanced twisted pair lead with Neutrik Female XLR and Neutrik TRS 1/4" 6.35mm Jack Plug

Developed for high demands of everyday use, including Stage, Concert, Mobile DJ's, Studio etc.

The cable has a special flexible PVC jacket, a pure copper spiral shield  and stranded pure copper inner cores that are twisted. The cable has ultra-low capacitance (60 pF/m) for better clearer sound reproduction. It has all the features that are expected from a brand cable.

This lead is made up by us Ultimate Pro Audio Ltd in our workshops by professional technicians with 30 plus years of experience. We use 4 percent lead free silver solder, which gives an extremely good soldered joint, harder, longer lasting. We only use high quality components when making any lead this ensures you will always get a professional reliable lead that will not let you down when you are under pressure to perform at your best. Klotz and Neutrik are both made in Germany. Both Neutrik and Klotz have their very own websites, which reinforces their commitment to professional audio applications. We have looked at many cables on the market from all over the world and there very few that are as high quality as this cable. The connectors are one of highest quality that are available, made to the high specifications, CNC machined reliable and robust. We only use genuine Neutrik connectors.

Cable Length - Important

PLEASE MEASURE UP CAREFULLY TO AVOID ERRORS

Leads 1m or less (patch leads) will be measured visible cable from the rear black boot of the connector. We add 100mm of cable FREE to compensate for the connectors.

Leads over 1m will be measured cut length of cable. The connectors use up 100mm of cable.

If you need any specific length or need a little extra please ask - it can be made to that length as these are made to measure when we receive the order. Contact through eBay messages.

We can make the lead to an exact length if you want - Order the lead that is slightly longer and message us through eBay.

If you want a longer lead let us know.

Typical Applications Examples

To interconnect audio equipment such as:

Patching audio equipment in a rack etc

Connecting mixer output XLR to active powered speakers on Jack Input

Signal input link between amplifiers as a link

Microphone to Mixer Balanced input - Mic Level

For Mic/Line level use.

Note

This lead is for mic/line level signal and should never be used on the speaker output of an amplifier to connect a passive speaker. If you are after this type of lead please see our e shop for more leads.

Features

Ultra-low capacitance (60 pF/m)

Extremely flexible cable

Reliable and robust

Specification KLOTZ Mic Cable MY206

Conductor: stranded bare copper, 28 x 0.10 mm

Cross Section: 0.22 mm2

Insulation: PE

Core Arrangement: 2 cores + cotton tracers, twisted

Shielding: bare copper spiral shield

Outer Jacket: PVC, matt

Overall Diameter: 6.15mm

Min Radius: 30mm

Working Temperature: -20C / +70C

Conductor Resistance: 85 ohm/km

Capacitance:

Cond/Cond. 60 pF/m

Cond/Shield 110 pF/m

Insulation Resistance: > 100 Mohm x km

Please read Terms and conditions of the sale - Buying this item(s) means you accept these terms