TRAXXAS-1 / 10 4WD FORD GT4-TEC 2.0 aluminum alloy front and rear suspension plate + thick spring models front and rear suspension set
Article number: GT28305053
Single package weight: 108G
Original factory number: 8338 + 8360
2. Multi-hole design, freely adjust the angle of the suspension position according to needs
3. Using thicker wire diameter spring (original 1.75mm, this product 2.0mm), high concentration of suspension oil, stronger stability
4. Reduced suspension length (original 55mm, this product is 53mm in front and 50mm in rear), so that the height of the body from the ground is reduced (original 11mm from the ground, 8mm with this kit),
Enhance the smoothness of the car
5. The front and rear are designed with different lengths according to the body conditions. The front part is 53mm long and the rear side is 50mm long.
6. The shock absorber is thickened from the original 3.0mm diameter to 3.5mm, which is stronger and stronger.
1. This part is made with a quality light weight high tensile strength aluminum 6061 T6 for a stable performance and modified to have a more 3D looking appearance.
2. Multiple positioning holes designed to adjust the angle of the shocks based on your needs.
3. Coil length is thickened from 1.75mm to 2mm in order to be more sturdy. High concentration oil is used to increase stability.
4. Length of damper is shortened from 55mm to 53mm (front) and 50mm (rear) so the vehicle is closer to the ground (from 11mm to 8mm) which will be more stable when in motion.
5. Based on the different height of front and rear, the product is designed with different length (front 53mm, read 50mm) to balance the vehicle.
6. Damper shaft is thickened from 3mm to 3.5mm in order to be more sturdy and prevent bending. Applicable models: TRAXXAS-1 / 10 4WD FORD GT4-TEC 2.0 (dedicated)