This item includes:

1.4PCS Nema34HS5435C-02B2 stepper motor 1600oz.in=10.5N.m 3.5A 151mm ,dual shaft

2.4PCS Stepper motor driver High Perfermance Stepper Driver DM860A Up to7.8A, 24-80VDC

3.4PCS Power supply 350W-60VDC

4.1 PCS Breakout board

Detailed information:

1.  Nema34HS5435C-02B2 stepper motor 1600oz.in=10.5N.m 3.5A 151mm dual shaft

 

Model
Step angel (° )
Motor Length L(mm)
Rate Voltage
(V)
Rate Current (A)
 Phase Resistance ( Ω )
Phase Inductance (mH)
Holding Torque (oz.in)
Lead Wire (NO.)
Rotor Inertia 
(kg. c?)
 Motor Weight (kg)
               34HS5435C-02B2
1.8
151
5.7
3.5
1.9
22
1600
4
3.6
5
 

2. nema 34 step stepper motor driver---DM860A

Introduction:

    nema 34 step stepper motor driver DM860A is a type of two-phase hybrid stepping motor driver, the drive voltage of which is from 24VDC to 80VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 57mm to 110mm outside diameter and less than 8.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Holding torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on.

Features:
1. High performance, low price
2. Average current control, 2-phase sinusoidal output current drive
3. Supply voltage from 24VDC to 80VDC
4. Opto-isolated signal I/O
5. Overvoltage, under voltage, overcorrect, phase short circuit protection
6. 14 channels subdivision and automatic idle-current reduction
7. 8 channels output phase current setting
8. Offline command input terminal
9. Motor torque is related with speed, but not related with step/revolution
10. High start speed
11. High holding torque under high speed


3. nema 34 step stepper motor driver Power Supply:

The power is 350W-60V/5.83A.

4. nema 34 step stepper motor Breakout board:
 
  • Built in DB25 male connector.
  • DB25 Output Pin:P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17.
  • DB25 Input Pin: P10,P11,P12,P13,P15.
  • DB25 GND Pin: P18-P25.
  • Power supply: +5V DC.
  • Built in C-class Optical-coupler.
  • High quality with Surface-mount Tech.