Our standard power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits. This set adapts an aftermarket 1982-1988 T-Bird/Cougar type rack or our 91034340-POW rack to a GM style pump. Return hose will normally need to be cut to length.

The pressure line in this kit has a 5/8"-18 male inverted flare fitting at the power steering pump end along with a -6AN to an 9/16"-18 (14mm-1.5) male O-ring fitting on the rack end. Note this is an O-ring style sealing design, and not an inverted flare sealing style. It also includes an adaptor so that it can work with an O-ring style (metric) pump fitting. We suggest using power steering pump or.

Kit includes:

• Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting.
• The included fittings that will install into the aftermarket 1982-1988 T-bird type rack which are 9/16"-18 (14mm-1.5) O-ring (high pressure) and 5/8"-18 (16mm-1.5) O-ring (low pressure return) with the smaller O-ring fitting hose end being the pressure side for the rack.

(PDF)

Pressure line is 18.75" center to center on 90 deg bends and has a 5/8"-18 IFM on pump end (16mm oring when used with included insert adapter) and -6 AN Female with 14mm o-ring adapter fitting on rack end. Return line is 24" with 90 degree -6 AN Female with 16mm male o-ring adapter fitting. 14mm o-ring for high pressure and 16mm o-ring for low pressure.