RCA to Male XLR Cable Gold Phono Red Boot Ring Lead Van Damme Neutrik Rean  (Options See Below for Colour ID)

Excellent sound quality, robustness, that is what you will get from this lead. 

Designed to go from an RCA Phono output to an XLR input. The audio source could be any audio equipment, examples CD players, Tape Decks, Media players etc. The XLR would go into an audio input, this could be a mixing desk, active speaker, active subwoofer etc. The cable is designed with a dual screened to help with noise reduction for better sound quality.

This lead is made by us. We have been in the industry for over 30 years and have vast experience in soldering. We use advanced soldering equipment as well as 4 percent silver solder in the construction.

This is for one lead, sold as a single lead. 

Options ID colour for left and right applications

We also sell this cable with red/white ID colour rings/boot, for left and right audio. (Sold as single leads) 

Click Here RCA Lead Option

Cable Length - Important

 PLEASE MEASURE UP CAREFULLY TO AVOID ERRORS

 Leads 1m or less (patch leads) will be measured visible cable from the rear boot of the connector. We add 90mm of cable FREE to compensate for the connectors.

 Leads over 1m will be measured cut length of cable. The connectors use up 90mm of cable.

 If you need any specific length or need a little extra please ask - it can be made to that length as these are made to measure when we receive the order. Contact through ebay messages.

 We can make the lead to an exact length if you want - Order the lead that is slightly longer and message us through ebay.

Neutrik Rean Connectors 

We only use genuine connectors. We use NC3MXX-B Male Gold XLR with red boot and NYS373-2 Male Gold RCA. Both connectors have gold contacts, black outer shell and cord grips built inside them to enusure cable stays firmly inside the connectors.

Van Damme Cable Specifications

Van Damme Pro Grade Classic XKE Instrument Cable:

Now with Van Damme new logo on the cable. Low capacitance, Oxygen Free silver plated Copper for better sound reproduction over just copper cable, low capacitance. Commonly used for unbalanced input and output audio devices. The cable has excellent noise rejection due to its tight construction dual screens of conductive thermoplastic and close lapped copper screen.

Mechanical Specification
Conductors 3 x 0.20 mm silver plated ultra-pure oxygen-free copper
4 x 0.20 mm bare ultra-pure oxygen-free copper
Conductor size 7 x 0.20 mm, 0.22 mm2, AWG 24/7
Insulation Foamed polyethylene
Screen 1 0.40 mm conductive thermoplastic
Screen 2 80 x 0.10 mm close lap spiral bare oxygen-free copper
Jacket material Flexible PVC/Neoprene composite
Overall diameter 6.00 ± 0.15 mm
Bend radius 10 x overall diameter
Operating temperature -20 to +70 ⁰C

Electrical Specification
Resistance Conductor < 90 Ohm/km
Insulation > 5000 MOhm/km
Capacitance Core to screen 90 pF/m
Please read Terms and conditions of the sale - Buying this item(s) means you accept these terms