- Condition: 100% new
- Main Color: Blue
- Material: ceramic & plastic & rubber
- Outer Diameter: approx. 35mm
- Total Height: approx. 58mm
- Distance Between Two Key Lugs: 18mm from center to center
- Maximum Rotation Angle: 45 degree angle
- Maximum Operating Temperature: 100 degrees centigrade
- Maximum Pressure: 25kPa
- Item included: 1 x ceramic disc cartridge
- Suitable for: kitchen faucet, bathroom faucet...
- Note:
1) All dimensions are measured by hand, there may be small deviations.
2) Color may vary slightly due to the color setting of each individual monitor.
3) Ceramic piece valve core refers to the internal friction disc, not the entire valve is made of ceramic, ceramic piece valve core casing is usually plastic.
Feature:
1) Good heat-resistant and wear-resistant ability.
2) Max acceptable temperature is about 100 degrees Celsius.
3) High sealing performance, strong resistance to opening.
4) Ceramic type can avoid water leakage and save water.
Installation:
1) Remove the faucet hot and cold logo first.
2) Loosen the inner screw with a screwdriver in counter clockwise direction.
3) Pull out the handle, then screw out the net cover by hand.
4) Loosen the hex cap using a wrench.
5) Take out the original cartridge and install the new item.
6) Please note that concave point is aligned with the original position.
