Usage guide
MINIMUM OF 2 COATS REQUIRED. SUBSEQUENT COATS MUST BE APPLIED ON THE SAME DAY NO LONGER THAN 8 HOURS APART. IF NOT POSSIBLE, LIGHTLY SAND DOWN SURFACES BEFORE RECOAT TO ENSURE ADHESION.
Preparation:
All surfaces should be clean and dry. If it has been previously coated, loose, flaking paint should be stripped back to bare wood.
Test a small area first for colour and adhesion.
Colour:
The final colour will vary depending on the surface and number of coats. If adhesion is inadequate on previous coatings, lightly sand before application. Make sure wood has been pre treated with appropriate wood preserver to prevent wood and decay.
Apply:
Apply in dry conditions, above 5 degrees Celsius and when bad weather is not forecast, minimum of 2 coats required.
Brush:
Stir thoroughly, before and during use. Brush on product, evenly, along the grain.
Spray:
Stir thoroughly before pouring contents into the Cuprinol sprayer. Refer to the Sprayer user guide for full instructions before every use. Cover any nearby surfaces in case of overspray. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent.
Dry:
Cuprinol Garden Shades will be touch dry in 1 hour under normal weather conditions. On areas subject to wear, such as garden furniture, allow a few days before heavy use or contact with soft furnishings.
Believed to be safe, once dry, for use on wood which pets, wild animals and birds come into contact or gnaw.
Clean:
Reseal can after use. Clean up spills while still wet. After use, remove as much product as possible from brushes before cleaning with water. Do not store or use in extremes of temperature and protect from frost.
All
items sold are new & unused unless otherwise stated and
should therefore be returned in the same saleable condition. We will
accept any items back for refund if they are returned to us in
original, unopened packaging and are in an unused condition. Refunds
will be made of the purchase price paid if returned within 60 calendar
days of
receipt. Returns postage and packaging costs should be met by the buyer
unless the item is either damaged or faulty. If goods are damaged or
faulty please notify us through eBay messaging to enable us to issue
you
with a pre-paid returns label. Once we have received your item using
the pre-paid returns label a refund will then be given unless a
replacement has been issued prior to return.
Please note: we will not be able to cover return postage costs that do not adhere to this process.
All
goods returned must be arranged prior to sending via the eBay
messaging service. This will enable us to assist you more thoroughly
with your request and to deal with any difficulties. Refunds will only
be issued if the buyer encloses within the return a copy of the
purchase invoice, a brief explanation as to why the item is being
returned, and also their eBay user name, ID and home address. The refund
will be by the same method used as the original payment.