|
|
|
|
|
|
|
|
|
|
|
|
|
Product Specifications:
(Please make sure you take the proper measurements before purchasing)
Quantity: 4pcs
Thickness: 10mm per spacer
Hub Bore Size: 57.1mm (outer diameter of center ring)
Vehicle Bolt Pattern: 5x100mm & 5x112mm
Wheel Bolt Pattern: 5x100mm & 5x112mm
Thread Pitch: M14x1.5
Compatibility Information:
(Please check the compatibility chart carefully before purchasing)
Audi:
Volkswagen:
How to choose the correct wheel spacers:
STEP. Check 3 specifications
The following is the easy and simple way to check the bolt pattern/PCD, center/hub bore and thread pitch. If you donot sure, please just message us with the year, make and model of vehicle.
1). Check Vehicle Bolt Pattern/PCD For 4-lug, 6-lug, 8-lug, measure the segment from the CENTER of a bolt hole TO the CENTER of another hole. 5 lug is different, you need to measure the back of the hole to the center of the second bolt hole (not center point).(See Bolt Pattern Diagram below)
2). Check Vehicle Hub/Center Bore Size Measure the diam of the center bore on hub, make sure the spacer's diam is equal to or bigger than the axle diameter.
3). Check Vehicle Thread Pitch There are different types of studs, such as M12x1.25, M14x1.5, M12x1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.
How to install the wheel spacers:
1). IMPORTANT - ADAPTER OR SPACER MUST SIT FLUSH AGAINST VEHICLE HUB, AND WHEEL MUST SIT FLUSH AGAINST ADAPTER OR SPACER! Stock studs must be trimmed down (shortened) if they protrude past the surface of the adapter or spacer. If not, vibration or other problems can occur. Some wheels have pockets that may allow for no stud trimming. If not, studs MUST be trimmed.
2). Make sure the mounting surface (vehicle hub) is clean and flat, and remove all retaining clips.
3). Install the adapter to the vehicle, with the proper lug nuts, and torque to manufacturer’s wheel torque specs.
4). Install the wheel to the adapter by torquing to the vehicle manufacturer’s wheel torque specifications (again, max 140 ft-lbs). Please assure the proper thread engagement (6 to 8 full turns) on lug nuts or bolts.
5). Drive the vehicle. If no problems (noise, vibration, anything out of the ordinary), drive about 5 miles, then re-torque the lug nuts attaching the spacer or adapter to the hub.
Item Specifics | |
---|---|
Brand | Ignition coil |
Manufacturer Part Number | IG81955301il |
Type | Wheel Spacers |
Quantity | 4pcs |
Thickness | 10mm |
Vehicle Bolt Pattern | 5x100mm & 5x112mm |
Wheel Bolt Pattern | 5x100mm & 5x112mm |
Hub Bore Size | 57.1mm (outer diameter of center ring) |
Hubcentric | Yes |
Thread Pitch | M14x1.5 / 14mmX1.5 / 14x1.5 |
Stud Grade | 10.9 |
Color | Silver |
Lug Patterns | 5 Lugs |
Material | High Quality T6-6061 Billet Aluminum |
Surface Finish | CNC Machined Polished Aluminum Finish |
Placement on Vehicle | Left |
Fitment | for Audi A3 A4 A6 A8 TT Quattro Volkswagen Golf Tiguan |
Interchange Part Number | fits 1999-2014 Audi TT 1993-2015 Volkswagen Jetta |
Other Part Number | for vw wheel spacers |
Superseded Part Number | 5x100 & 5x112 wheel spacers |
Warranty | 1 Year |
Return | Free 30 day returns |
Delivery Area | The USA |
Place of Delivery | Ontario,California |
Note | If you can't confirm, please contact us |
You have 7 days to contact us and 10 days to return it from the date it was received. If this item is inyour possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
Store Cat. |
4pcs 10mm Hubcentric Wheel Spacers 5x100 & 5x112 Fits VW Golf Jetta Audi A4 A6
Product Specifications: (Please make sure you take the proper measurements before purchasing)
Quantity: 4pcs
Compatibility Information: (Please check the compatibility chart carefully before purchasing)
Audi:
Volkswagen:
How to choose the correct wheel spacers:
How to install the wheel spacers:
1). IMPORTANT - ADAPTER OR SPACER MUST SIT FLUSH AGAINST VEHICLE HUB, AND WHEEL MUST SIT FLUSH AGAINST ADAPTER OR SPACER! Stock studs must be trimmed down (shortened) if they protrude past the surface of the adapter or spacer. If not, vibration or other problems can occur. Some wheels have pockets that may allow for no stud trimming. If not, studs MUST be trimmed.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!▪ Orders processed within 24-48 hours of payment verification.
▪ We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
▪ The images shown are not the actual item and are for your reference only.
▪ Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!▪ Orders processed within 24-48 hours of payment verification.
▪ We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
▪ The images shown are not the actual item and are for your reference only.
▪ Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
You have 7 days to contact us and 10 days to return it from the date it was received. If this item is inyour possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
Copyright of ignition-coil. All rights reserved. |