Note: Orders from the USA will all be shipped out via our US warehouse. If you order from outside of US the product will be shipped from China.

Instruction

This tester can be used to test the quality of brake fluid.It can indicated whether the brake fluid under test can still be used safety or needs to be replaced.It is a very useful tool for ensuring good braking effect anf driving safety.

Features

• LED Indicator
• Yellow LED light - BAD quality
• Red LED light and buzzer sounds - UNSAFE quality
• Foldable testing rod 180°pucker
• Handheld compact design
• Buzzer warning for exhausted battery
• It complies with all essential health and safety requirements set out in European Directives
• (CE marking)

Specifications

• LED display (4 LED's)
• Built-in buzzer
• 180°C pucker folding rod
• Power Supply : 1 x 9V(6F22) battery (NOT included)
• Length of testing rod : 134mm
• Dimension : 175 x 70 x 29mm
• Weight : Approx. 160g
• Approval : CE approved

Calibration Procedure

Before using, you should calibrate the tester.

To calibrate the tester:

1. Clean the test head and make it dry.

Note:The test head consists of the two electric poles and the short cylinder connecting with the two electric poles.

2. Insert the test head into the new brake oil about 2cm deep,or expose the test head in dry air directly.

Note:If you choose to use new brake oil to calibrate the tester,this new brake oil must be the same type as the brake oil you want to test later.

3. Press and hold down the “ON”button,wait about 3 seconds,then use a suitable screwdriver to adjust the adjustor.When the first green LED just lights up and the other LEDs are off,stop adjusting the adjustor.Now the tester is ready for use.

Note: Don’t release the “ON” button until the calibration is finished.