This multimeter is compact 3 5/6-digit true rms digital multimeter with the USB 2.0 standard interface.It can be used for measuring DC voltage,DC current,trus-rms AC voltage,true-rms AC current,resistance,capacitance,frequency,diode,temperature, continuity and duty cycle.It features polarity indication,data hold,backlight,overrange indication,low battery indication,relative measurement,MAX/MIN recording mode and automatic power-off.It is easy to operate and is an ideal measurement tool.

What are the advantages in TRMS Multimeter?

A multimeter can be assumed to be "average responding" to AC waveforms unless stated as being a "True RMS" type. An average responding multimeter will only meet its specified accuracy on AC volts and amps for purely sinusoidal waveforms. A True RMS responding multimeter on the other hand will meet its specified accuracy on AC volts and current with any waveform type up to a specified crest factor.The True RMS multimeter measures the real readings, not the average reading. So it will be much accurate than normal multimeter.

Features

1. Measures true-rms AC voltage and true-rms AC current.

2. Transfers the measurement readings of the meter to a computer through standard USB port.

3. Provides analog bar graph, reading unit indication and backlight.

4. The sampling rate is about 3 times/sec.

5. Provides automatic polarity indication, manual range mode and autorange mode.

6. Provides low battery indication, overrange indication,automatice power-off,  manual power-off,relative measurement, and max/min value recording.

7. Measures DC/AC voltage, DC/AC current, resistance. capacitance, frequency,  diode, temperature, continuity and duty cycle.

8. Provides overload protection for all ranges.

9. Low power consumption.

Technical Specification

DC Voltage: 600mV/6V/60V/600V

AC Voltage: 6V/60V/600V

DC Current: 600μA/6000μA/60mA/600mA/6A/10A

AC Current: 600μA/6000μA/60mA/600mA/6A/10A

Resistance: 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ

Frequency: 9.999Hz/99.99Hz/999.9Hz/9.999kHz/99.99kHz/999.9kHz/9.999MHz

Duty Cycle: 5%-95%

Capacitance: 40nF/400nF/4μF/40μF/400μF/4000μF

Temperature: -20°C to 1000°C (-4°F to 1832°F)

Diode: The approximate forward voltage drop of the diode will be displayed.

Continuity: The built-in buzzer will sound if the resistance is less than about 20Ω. The buzzer will not sound if the resistance is more than 150Ω

General Specification

Maximum Voltage between any Terminal and Earth Ground: 600Vrms

Fuse Protection for "uA/mA"Jack Inputs: 630mA,690V,FAST,Min,Interrupt Rating 20000A

Fuse Protection for "10A"Jack Inputs: 10A,690V,Fast,Min,Interrupt Rating 20000A

Display: LCD,with a max,reading of 9999

Overrange Indication: "OL"shown on the display

Negative Polarity Indication: "-" shown on the display automatically

Sampling Rate: about 3 times/sec

Operating Environment: 0 ℃-40℃,

Temperature Coefficient: 0.2x(specified accuracy)/℃(28℃)

Storage Environment: -30-60℃,

Operating Altitude: 0-2000 meters

Battery: 9V,6F 22 or equivalent (not in the package)

Size: 185x86x44mm

Weight: about 380g(including battery and the holster)