LED strips will give you the best, most even coverage

for your tent or room, period.

With these complete DIY kits using Samsung LEDs, all you'll need is a drill, a 1/8" bit, wire strippers, and a phillips screwdriver to build your light.

LISTING INCLUDES:

6 - 2700k Strips with 96 - Samsung lm301b LEDs

6 - 40mm x 450mm heatsinks (40mm x 860mm 2 strip heatsinks optional)

2 - pcs 1/2" 18ga aluminum angle in 18", 24", 32" or 36" (custom sizes optional)

30mm double sided Thermal tape pre-applied to boards

Meanwell HLG-185H-C1400B w/wago connectors for power and led hookup

3 ft Power cord for driver(6-footer available)

Optional pre-wired dimmer switch available

5 feet of solid core 18ga wire to hook strips up

Assorted screws(to build frame)

Extra wago connectors

EACH STRIP:

24V

48W max recommended

1800mA max recommended

30mm x 400mm

Dual Connectors(easier to wire in series and/or parallel)

2oz RA Copper

 

This listing is for 6 of these strips with heatsinks to mount them on, aluminum angle(2 each of 18", 24", 32" or 36" length) to build a frame with and everything you need to get them growing, including a Meanwell HLG-185H-C1400B driver, power cable for driver and we even offer the option of a prewired dimmer for the driver. We will pre-apply 30mm double sided thermal conductive tape on the boards for you so all you will need to do is pull the release paper and press them onto your heatsinks for great holding power plus you gain the benefit of transferring the heat to the heatsink much better. All you will need is a drill and 1/8" bit, a good phillips screwdriver, and some wire strippers. These are 30mm x 400mm (approximately 1.2 inch x 16 inches) 96 Diode Strips using the Samsung lm301b top bin diodes. You get 6 of the 40mm x 450mm heatsinks. These make it so easy to build a frame for your light as well as keep your strips cooler, thus increasing the efficiency and the life of your strips. These do use true Samsung lm561c leds and also have the wire hook-ups on each end of the board making it so much easier and less messy to wire them in series, parallel, or however you need for your project. For the size, number of diodes, efficiency, versatility, and power capability, you won't find a better deal than these strips. This listing is for 4 of the 2700k(recommended for blooming) strips and two of the 6500k(recommended for vegetation). Mixing these spectrums 2:1 like this covers a broader spectrum than can be achieved with any one color. They are rated at 24V and 1800mA max per strip and although they can handle a little more, they are much more efficient in the 1050-1400mA range. There are many other driver/strip configurations that work(too many for me to list), but just ask and I can recommend a custom kit for you and I will answer any questions you have or, since we have tons of drivers in stock, we can build you a custom DIY Kit. Check out my other listings for separate listings, different spectrums, mixed sets, sets with heatsinks, blue booster boards, red booster boards, or, if you need a different quantity or custom configuration, just let me know. We always have discreet shipping and this is a private listing, so your purchase will remain anonymous on eBay.

What you get is in the description. Some photos may be stock or show other items for reference only. If you have a question, please ask before purchase.