PRODUCT DESCRIPTION:
Specifically formulated for use on pressure treated and preservative impregnated timber offering superb protection to deck boards, deck tiles and balustrades.
Also achieves a superior finish to summerhouses, sheds and fences. Non-flaking and its water repellency help prevent timber from splitting and cracking.
- UV fade resistant pigments.
- Contains a surface biocide preserver to protect against mould.
COLOURS:
The colour swatches are an indication only and representative of the product applied to clean new/pale timber. The final colour finish can vary considerably due to the age, type & condition of the timber being treated. We always recommend carrying out a test area first in an inconspicuous area to make sure you are happy with the final dried colour.
An example of the variation in colour of 'Natural Oak' can be seen below on clean new/pale timber (Right) and rough sawn timber (Left).
- KEY Features
- Oils, Protects and Stains all in one treatment.
- Built in UV protection.
- Translucent finish, wood grain pattern is visible.
- Low odour formulation.
- Non flaking and its water repellency helps prevent timber splitting and cracking.
- Dry film preserver helping stop mould and fungi growth.
- Harmless to plants and pets when dry.
- Brush or spray application.
- Available in 5 colours and clear.
- For unpreserved/untreated timber. We recommend using Barrettine Universal Preserver first as a primer.
- Application
- Ensure wood to be treated is dry, free from dirt and repellent coatings such as paint or varnish (remove and sand down as required).
- Recommend using a biocidal wash such as Knockout Decking and Patio Cleaner prior to treatment. Allow a minimum of 48 hours to dry.
- The final colour finish can vary considerably due to the age, type & condition of the timber being treated. We always recommend carrying out a test area first in an inconspicuous area to make sure you are happy with the final dried colour.
- Brush or spray in suitable conditions. (Make sure weather conditions are dry and still).
- Coverage 1 coat up to 8 sq metres/litre of smooth timber and up to 5 sq metres on rough sawn timber, 2 coats recommended.
- Drying times, normally 24-48 hours in ambient temperature. Apply second coat after 48 hours.
- Clean equipment with Barrettine Brush Cleaner, White Spirit or Bio Spirit.