Makki Intensive Eyelash and Brow tints is a professional quality Eyelash and Eyebrow Tinting system, which is formulated to deliver all the requirements of professional hair salons. It was developed in close cooperation with professionals and their clients to ensure the high-quality finish, intense colour, long lasting application, enhanced curl holding and the caring properties of the product. The formula also contains argan oil and hyaluronic acid which are rich in vitamins, essential fatty acids and antioxidants to keep the hair of the eyelashes and eyebrows soft, well-hydrated and rejuvenated.Main Features:
The range also includes Eyebrow Bleaching Gel, which can lighten the colour of the eyebrows up to three levels, which is very useful in controlling the result, especially is you tinting the eyebrows to a lighter colour and to prepare some difficult to tint hair types.
- 10 Shades, the highest number of Eyelash and Brow colours ever.
- large tube size: 22ml sufficient for approximately 33 applications
- The range also include Brow Bleaching Gel in 15ml
- Developer comes in 2%, 3% and 6% concentrations, and in 60ml and 95ml bottle sizes - (Sold separately)
- Enhanced Intensive formula
- Enriched with Argan Oil and Hyaluronic acid
- Long lasting
- Well defined eyelashes and eyebrows
- Improved curl hold
- Extensive range of accessories (Sold separately)
Size:
Makki Tint tube: 22ml / 0.74 fl oz
Tint Package contains Flexi applicator (not included in the Brow Bleaching Gel) and Multilingual instruction leaflets (English , German, French, Spanish, Arabic and Japanese).
1) HOW TO USE MAKKI EYELASH / EYEBROW TINT:
MAKKI INTENSIVE LASH AND BROW TINT
Application Instructions
FOR PROFESSIONAL USE ONLY
We recommend that you carry out a skin allergy test 24 hours before the treatment. To do the test mix a tiny amount of the dye with one drop of the developer, and then apply to the crook of the elbow or behind the ear. 24 hours later, check the area for any signs of redness, rash or soreness, if you see any of these signs, do not proceed with the treatment.
1) Preparing the Client:2) Selecting the activator:
Client must be sitting upright in a chair with the head slightly tilted back. DO NOT APPLY IF THE HEAD OR THE BODY IS LAID BACK IN A RECLINED POSITION. For eyelashes, use only 2% Developer, do not use any developer with higher volume. For Eyebrows, use 3% or 6 % developer depending on the shade desired, original colour of the eyebrows, hair condition, etc.
3) Preparing the tint:Shake the developer well before use. Mix ¾ inch (2 cm) of Colour Cream with 2-4 drops of the Developer until the consistency becomes a creamy paste. (Ensure that consistency is not runny or drippy.). Let the mix develop for 3 minutes while the client is being prepared.
4) Preparing the area to be treated5) Application
Cleanse the area to be treated thoroughly ensuring that it is completely free of makeup, oil and grease. Use non-oily makeup remover, then finish cleansing by wiping the area with a cotton pad damped in lukewarm water. Dry and then apply Skin protection cream under the lower lid and around the eyes and / or eyebrows (if eyebrows also to be tinted) . Place protection pad under the lower lid to prevent the tint from staining the skin.
for eyelashes:
Using a tinting brush or application stick, apply the mix to the lower lashes first ensuring that the tint covers the hair from base to tip. Make sure that corner lashes are also covered. Then apply the tint to upper lashes from base to tip. Make sure that corner lashes are covered.
for eyebrows:
Apply the mix to the eyebrows using a tinting brush or application stick, ensure that you cover all hairs of the eyebrows.
When tinting is completed, instruct the client to sit quietly and relax until the end of the treatment.
6) Processing time:this depends on the following factors: original hair colour, tint desired, coarseness and condition of the clients hair, and room temperature. Although the usual processing time is 10 minutes for lashes and 3 minutes for brows, these times may produce results darker than expected. If you are working with Middle Brown, Brown or Graphite, we recommend that you allow eyelashes to develop for 3 minutes and the eyebrows to develop for one and half minutes. Then cleanse them and check the colour. If the eyelashes and/or eyebrows are not dark enough, re-apply and allow to them to process again until the desired colour is achieved. A general rule is that the longer you leave it, the darker the colour you get.
7) Completing and Finishing the treatment:
Use a cotton swab dampened in soap and water to remove any tint from the skin. DO NOT USE TINT SPOT CLEANSER ON THE SKIN. DO NOT ALLOW THE CREAM OR DEVELOPER TO REACH THE EYES, NOSTRILS, OR EARS. IF THIS HAPPENS, IMMEDIATELY FLUSH WITH WARM WATER AND DRY THE AREA.
Gently Remove the eye protection pads. Then, with the client’s eye closed, use a cotton ball soaked in warm water to remove product until no residues are visible. Use tissues to capture any dripping or excess.
NOTE: The colour of the mixture is not the colour that the hair will be once it is tinted. To get an idea of the final colour, leave a wooden applicator in the mixture for the desired time.
Instruction videos are available at www.makkicosmetics.comthe developer may look a bit thick due to changing room temperature, this does not affect the product quality. Always store in cool place.
2) How to use MAKKI Brow Bleaching Gel:
Brow Bleaching Gel can lighten the colour of the eyebrows up to three levels.Eyebrow bleaching gel is used in the following situations:
- to match the colour of the eyebrows to the colour of the hair when the hair is dyed with a lighter colour.
- if you want to tint the eyebrows with a lighter colour, example black to brown, brown to blonde or to red, it is always good practice and more efficient to bleach the eyebrow hair before tinting.
- some types of hair are difficult to colour such as coarse hair, white hair, etc, in such circumstances, bleaching the eyebrows prepares the hair for tinting and enhances colour intake.
We recommend that you carry out a skin allergy test 24 hours before the treatment. To do the test mix a tiny amount of the gel with one drop of the activator, and then apply to the crook of the elbow or behind the ear. 24 hours later, check the area for any signs of redness, rash or soreness, if you see any of these signs, do not proceed with the treatment.Application:1) Preparing the Client:Client must be sitting upright in a chair with the head slightly tilted back. DO NOT APPLY IF THE HEAD OR THE BODY IS LAID BACK IN A RECLINED POSITION.2) Preparing the mixture:Mix about 1.2 inch (3 cm) of Brow Bleaching Gel the same amount of 6% VOL 20 Activator.3) Preparing the eyebrow areaCleanse the eyebrows thoroughly ensuring that it is completely free of makeup, oil and grease. Use non-oily makeup remover such as MAKKI Eye Make Up Remover, then finish cleansing by wiping the area with a cotton pad damped in lukewarm water. Dry and then apply Skin protection cream such as MAKKI Skin Protection Cream around the eyebrows.4) ApplicationApply the mix to the eyebrows using a suitable brush such as a spoolie wand and ensure that you cover the eyebrows from root to tips. Then cover the eyebrows immediately with a transparent film and leave to process.5) Processing time:
- 7 min for 1 shade lift
- 12 min for 2 shade lift, or,
- 20 min for 3 shade lift.
6) Completing and Finishing the treatment:Remove the film and rinse with plenty of water.Precautions:
- A patch test is necessary 24 hours prior to each application. Can cause allergic reaction, always perform sensitivity test before application.
- Do not use on children under the age of 16.
- Avoid contact with eyes, if product comes in contact with eyes, rinse immediately with plenty of water.
- Wear gloves.
- Do not use metal bowl or instruments.
CHECK OUT OUR NEW PRODUCTS
|
|